-=] Overview

This is a list of the files included in the 'build.tar.gz' file.


-=] Node_Assassin_v1.1.4_gimp_layered_wiring_diagram[_inverted].xcf

These are the complete, layers The GIMP source graphic files. Both have all
wire "sets" on independant layers so that it is easy to see where wires are
routed.

The '_inverted' variant is flipped horizontally and the layers are re-arranged
so that, if you want to run the wires under the board, what you see on the
screen will match what you see in front of you.

                                 -= WARNING! =-

Be sure that you review each joint on all layers before soldering! Many pads
will have multiple wires going into them! Make sure you have all needed wires
in each given pad before soldering them in place. If you miss one, it can be
difficult to add later and increases the chance of over-heating and damaging
components.


-=] Node_Assassin_v1.1.4[_inverted]_##_<name>.png

These are individual images of each layer from the main XCF The GIMP files.
They are provided as an alternative for people who don't want to or can't
install The GIMP.

The '_inverted' variant is a copy of all the frames but flipped horizontally
and with the components partially hidden behind the board. This set is meant to
make it easier for wiring up the Node Assassin underneath the components as all
pins and wirings and in the proper place for that point of view.


-=] Node_Assassin_v1.1.4_BSch3V_Diagram.ce3

This is the BSchV3 project file for the Node Assassin v1.1.4. The program you
use to view and edit is a freeware windows program. It seems to work fine under
wine though. I used it under Ubuntu 9.10 and 10.04.

  BSchV3 Direct Download: http://www.suigyodo.com/online/e/bs3vp091025ertl.zip
  BSchV3 Project Homepage: http://www.suigyodo.com/online/e/index.htm

For your convenience, a copy of the BSch3V program is included in this file
set. It is strongly recommended that you check the author's website for updates
and only use the included program where necessary.
