Configuring Network Boot on Fujitsu Primergy - Revision history

Digimer: /* What to do if this doesn't work */

2015-01-10T01:55:05Z

What to do if this doesn't work

← Older revision		Revision as of 01:55, 10 January 2015
Line 103:		Line 103:
	And there you have it!		And there you have it!

	= ~~What to do if this doesn't work~~ =		= Missing NICs in Boot Menu =

	In some cases, the add-in Intel-based cards have their PXE booting disabled. In these cases, simply enabling the OpROM in the BIOS is not enough to enable PXE booting.		In some cases, the add-in Intel-based cards have their PXE booting disabled. In these cases, simply enabling the OpROM in the BIOS is not enough to enable PXE booting.

Digimer at 01:54, 10 January 2015

2015-01-10T01:54:20Z

Digimer: /* Booting from the network */

2015-01-10T01:53:22Z

Booting from the network

Show changes

Digimer: Digimer moved page Configuring Network Boot on Fujitsu to Configuring Network Boot on Fujitsu Primergy: Branding

2015-01-02T22:33:50Z

Digimer moved page Configuring Network Boot on Fujitsu to Configuring Network Boot on Fujitsu Primergy: Branding

← Older revision		Revision as of 22:33, 2 January 2015
(No difference)

Digimer: /* Booting from the network */

2015-01-02T22:16:40Z

Booting from the network

← Older revision		Revision as of 22:16, 2 January 2015
Line 91:		Line 91:
	=== Booting from the network ===		=== Booting from the network ===

			{{note\|1=The screen prompting for you to press '<span class="code"><F12></span>' to select boot might pass quickly. You can start pressing '<span class="code"><F12></span>' before seeing the prompt and it will still provide the boot selection menu.}}

			[[image:Fujitsu_BIOS_Boot-Prompt.png\|thumb\|center\|400px\|Fujitsu Primergy S8 - BIOS boot prompt]]

	~~[[image:Fujitsu_BIOS_~~.~~png\|thumb\|center\|400px\|Fujitsu Primergy S8 - BIOS - ]]~~		During the boot of the machine, you will see a prompt to press '<span class="code"><F12></span>' to "<span class="code">enter Boot Menu</span>".

	<span class="code"></span>		Press '<span class="code"><F12></span>' and then wait. The machine needs to scan a few things, like the RAID controller, before the boot device selection window appears.

			[[image:Fujitsu_BIOS_Boot-Device-Menu.png\|thumb\|center\|400px\|Fujitsu Primergy S8 - Boot device menu]]

			And there you have it!

			From here, you can pick up what to do next back at the main tutorial:

			* [[Anvil!_m2_Tutorial#Building_a_Node.27s_OS_Using_Striker\|Anvil! m2 Tutorial - Building a Node's OS Using Striker]]

	{{footer}}		{{footer}}

Digimer: /* Enabling Booting from onboard NICs */

2015-01-02T19:59:10Z

Enabling Booting from onboard NICs

← Older revision		Revision as of 19:59, 2 January 2015
Line 65:		Line 65:
	Press the '<span class="code"><esc></span>' key to return to the '<span class="code">Advanced</span>' page and then use the right arrow key to navigate to the '<span class="code">Save and Edit</span>' page. Select '<span class="code">Save changes and Reset</span>' and press '<span class="code"><enter></span>'.		Press the '<span class="code"><esc></span>' key to return to the '<span class="code">Advanced</span>' page and then use the right arrow key to navigate to the '<span class="code">Save and Edit</span>' page. Select '<span class="code">Save changes and Reset</span>' and press '<span class="code"><enter></span>'.

			=== Enabling booting from add-in NICs ===

			{{note\|1=Most ''Anvil!'' systems use one of the onboard NICs for the connection to the [[Back-Channel Network]], which is what we will use to boot the node off of the [[Striker]] dashboard. So for most people, this section is not needed.}}

			If you want to enable booting off of add-in network cards, you will need to tell the BIOS to look at them during boot.

			[[image:Fujitsu_RX200S8_Mainboard-Label.jpg\|thumb\|center\|400px\|Fujitsu Primergy RX200 S8 - Mainboard layout label]]

			To do this, you need to know which PCIe slot the add-in card is plugged into. Depending on your hardware server model, this should either be stamped into the metal near each expansion slot and/or shown on a label inside the server itself.

			Once you know which PCIe slots your add-in network cards are in, you're ready to enable them!

			Boot the computer and press <span class="code"><F2></span> to go back into the BIOS as before.

			[[image:Fujitsu_BIOS_Advanced-Menu_Option-ROM.png\|thumb\|center\|400px\|Fujitsu Primergy S8 - BIOS - <span class="code">Advanced</span> -> <span class="code">Option ROM Configuration</span>]]

			Navigate to the '<span class="code">Advanced</span>' menu and go down to the "<span class="code">Option ROM Configuration</span>" item and press '<span class="code"><enter></span>'.

			[[image:Fujitsu_BIOS_Option-ROM_Enable-Slots.png\|thumb\|center\|400px\|Fujitsu Primergy S8 - BIOS - <span class="code">Option ROM Configuration</span> menu]]

			Change the '<span class="code">Launch Slot X OpROM</span>' to '<span class="code">Enabled</span>' for the slots with NICs installed in them.

			Once done, as above, press '<span class="code"><esc></span>' to return to the '<span class="code">Advanced</span>' menu, then use the arrow keys to go to the '<span class="code">Save and Exit</span>' page and then choose the '<span class="code">Save changes and Reset</span>' option.

			=== Booting from the network ===

Digimer: /* Enabling Booting from onboard NICs */

2015-01-02T18:13:41Z

Enabling Booting from onboard NICs

← Older revision		Revision as of 18:13, 2 January 2015
Line 53:		Line 53:
	* <span class="code">iSCSI</span> is a way to use raw storage from a device on the network as if it was a local hard drive. Setting a NIC to '<span class="code">iSCSI</span>' boot mode tells the system to reach out over the network to find its "hard drive" to boot from.		* <span class="code">iSCSI</span> is a way to use raw storage from a device on the network as if it was a local hard drive. Setting a NIC to '<span class="code">iSCSI</span>' boot mode tells the system to reach out over the network to find its "hard drive" to boot from.

	[[image:Fujitsu_BIOS_LAN-~~Controller~~-~~Enable-PXE~~.png\|thumb\|center\|400px\|Fujitsu Primergy S8 - BIOS - ~~Enable~~ <span class="code">[[PXE]]</span> booting]]		[[image:Fujitsu_BIOS_LAN-Controller_PXE-Enabled.png\|thumb\|center\|400px\|Fujitsu Primergy S8 - BIOS - <span class="code">[[PXE]]</span> booting enabled]]

			Now we can select either onboard interface to boot off of!

			{{note\|1=It's outside the scope of this tutorial, but if you have hardware RAID and no optical drive, you can disable the onboard SATA to reduce boot times.}}

			[[image:Fujitsu_BIOS_Save-and-Exit.png\|thumb\|center\|400px\|Fujitsu Primergy S8 - BIOS - <span class="code">Save and Exit</span> page]]

			Now to save and exit.

			Press the '<span class="code"><esc></span>' key to return to the '<span class="code">Advanced</span>' page and then use the right arrow key to navigate to the '<span class="code">Save and Edit</span>' page. Select '<span class="code">Save changes and Reset</span>' and press '<span class="code"><enter></span>'.

Digimer: /* Enabling Booting from onboard NICs */

2015-01-02T17:27:33Z

Enabling Booting from onboard NICs

← Older revision		Revision as of 17:27, 2 January 2015
Line 43:		Line 43:
	Press the '<span class="code">down</span>' key to highlight "<span class="code">Onboard Devices Configuration</span>" and press '<span class="code"><enter></span>'.		Press the '<span class="code">down</span>' key to highlight "<span class="code">Onboard Devices Configuration</span>" and press '<span class="code"><enter></span>'.

			[[image:Fujitsu_BIOS_LAN-Controller-Oprom.png\|thumb\|center\|400px\|Fujitsu Primergy S8 - BIOS - <span class="code">LAN Oprom</span> settings]]

			You will an option to enable or disable the onboard [[LAN]] (network) interfaces followed by an option to set if each is bootable and, if so, using what protocol.

			Select each '<span class="code">LAN X Oprom</span>' that is '''not''' set to '<span class="code">PXE</span>', press '<span class="code"><enter></span>' and select the '<span class="code">PXE</span>' option. Press '<span class="code"><enter></span>' again to make the change.

			Some trivia;
			* <span class="code">Oprom</span> is short for "'''Op'''tion '''ROM'''" (itself an acronym for "'''R'''ead '''O'''nly '''M'''emory) and is used by the hardware to determine where to look for bootable devices.
			* <span class="code">iSCSI</span> is a way to use raw storage from a device on the network as if it was a local hard drive. Setting a NIC to '<span class="code">iSCSI</span>' boot mode tells the system to reach out over the network to find its "hard drive" to boot from.

			[[image:Fujitsu_BIOS_LAN-Controller-Enable-PXE.png\|thumb\|center\|400px\|Fujitsu Primergy S8 - BIOS - Enable <span class="code">[[PXE]]</span> booting]]

	[[image:Fujitsu_BIOS_.png\|thumb\|center\|400px\|Fujitsu Primergy S6 - BIOS - ]]


			[[image:Fujitsu_BIOS_.png\|thumb\|center\|400px\|Fujitsu Primergy S8 - BIOS - ]]

	<span class="code"></span>		<span class="code"></span>

	{{footer}}		{{footer}}

Digimer at 17:06, 2 January 2015

2015-01-02T17:06:40Z

← Older revision		Revision as of 17:06, 2 January 2015
Line 9:		Line 9:
	{{note\|1=There may be slight variations in the appearance and layout of your BIOS, though you should have no trouble finding what you need.}}		{{note\|1=There may be slight variations in the appearance and layout of your BIOS, though you should have no trouble finding what you need.}}

	[[image:Fujitsu-BIOS-F2.png\|thumb\|center\|400px\|Fujitsu Primergy S6 - BIOS - <span class="code"><F2></span>]]		[[image:Fujitsu-BIOS-F2.png\|thumb\|center\|400px\|Fujitsu Primergy S8 - BIOS - Press <span class="code"><F2></span> during initial [[POST]].]]

	When you first power on a Fujitsu Primergy server, it will take a minute or so for anything to show on the screen. This is normal, particularly after [[AC]] was disconnected.		When you first power on a Fujitsu Primergy server, it will take a minute or so for anything to show on the screen. This is normal, particularly after [[AC]] was disconnected.
Line 19:		Line 19:
	The machine will continue to boot, scanning the RAID controller in the process. Once done, it will enter the BIOS scree.		The machine will continue to boot, scanning the RAID controller in the process. Once done, it will enter the BIOS scree.

	[[image:Fujitsu_BIOS_Main-page.png\|thumb\|center\|400px\|Fujitsu Primergy S6 - BIOS - <span class="code">Main</span> page]]		[[image:Fujitsu_BIOS_Main-page.png\|thumb\|center\|400px\|Fujitsu Primergy S8 - BIOS - <span class="code">Main</span> page]]

	The first page you will see is the <span class="code">Main</span> BIOS page.		The first page you will see is the <span class="code">Main</span> BIOS page.
Line 25:		Line 25:
	== Enabling 'PXE' (Network) Booting ==		== Enabling 'PXE' (Network) Booting ==

	[[image:Fujitsu_BIOS_Advanced-page.png\|thumb\|center\|400px\|Fujitsu Primergy S6 - BIOS - <span class="code">Advanced</span> page]]		Most ''Anvil!'' systems use three separate dual-port network cards. The first two ports are usually built into the server and the other two are add-in cards.

			If you aren't sure which is which, you can simply enable all of them as bootable cards.

			The goal of this tutorial is to make life easy, if not efficient, so we will cover how to enable all interfaces as bootable devices.

			=== Enabling Booting from onboard NICs ===

			{{note\|1=To navigate the BIOS pages, use your left and right arrow keys. One you are on the page you want, press the up and down keys to moved between the items. Press '<span class="code"><enter></span>' to edit an item's value.}}

			[[image:Fujitsu_BIOS_Advanced-page.png\|thumb\|center\|400px\|Fujitsu Primergy S8 - BIOS - <span class="code">Advanced</span> page]]

			Press the '<span class="code">right</span>' arrow key to switch to the '<span class="code">Advanced</span>' page.

			[[image:Fujitsu_BIOS_Onboard-Devices-Configuration.png\|thumb\|center\|400px\|Fujitsu Primergy S8 - BIOS - <span class="code">Onboard Devices Configuration</span> page]]

			Press the '<span class="code">down</span>' key to highlight "<span class="code">Onboard Devices Configuration</span>" and press '<span class="code"><enter></span>'.


	~~Press the '<span class="code">-></span>' key to switch to the '<span class="code">Advanced</span>' page.~~

Digimer: Created page with "{{howto_header}} {{note|1=This mini-tutorial was written as a compendium to the Anvil! m2 Tutorial.}} This tutorial will show you how to boot a Fujitsu server off of a [..."

2014-12-31T23:16:03Z

Created page with "{{howto_header}} {{note|1=This mini-tutorial was written as a compendium to the Anvil! m2 Tutorial.}} This tutorial will show you how to boot a Fujitsu server off of a [..."

Páàjì titun

{{howto_header}}

{{note|1=This mini-tutorial was written as a compendium to the [[Anvil! m2 Tutorial]].}}

This tutorial will show you how to boot a Fujitsu server off of a [[PXE]] server, as is often done when using a [[Striker]] dashboard as an install target.

= Enter the BIOS =

{{note|1=There may be slight variations in the appearance and layout of your BIOS, though you should have no trouble finding what you need.}}

[[image:Fujitsu-BIOS-F2.png|thumb|center|400px|Fujitsu Primergy S6 - BIOS - <F2>]]

When you first power on a Fujitsu Primergy server, it will take a minute or so for anything to show on the screen. This is normal, particularly after [[AC]] was disconnected.

When it does show the first screen, you will see a prompt to press <F2> to enter the [[BIOS]].

Press <F2> and then wait.

The machine will continue to boot, scanning the RAID controller in the process. Once done, it will enter the BIOS scree.

[[image:Fujitsu_BIOS_Main-page.png|thumb|center|400px|Fujitsu Primergy S6 - BIOS - Main page]]

The first page you will see is the Main BIOS page.

== Enabling 'PXE' (Network) Booting ==

[[image:Fujitsu_BIOS_Advanced-page.png|thumb|center|400px|Fujitsu Primergy S6 - BIOS - Advanced page]]

Press the '->' key to switch to the 'Advanced' page.

[[image:Fujitsu_BIOS_.png|thumb|center|400px|Fujitsu Primergy S6 - BIOS - ]]



{{footer}}

← Older revision		Revision as of 01:54, 10 January 2015
Line 9:		Line 9:
	{{note\|1=There may be slight variations in the appearance and layout of your BIOS, though you should have no trouble finding what you need.}}		{{note\|1=There may be slight variations in the appearance and layout of your BIOS, though you should have no trouble finding what you need.}}

	[[image:Fujitsu-BIOS-F2.png\|thumb\|center\|~~400px~~\|Fujitsu Primergy S8 - BIOS - Press <span class="code"><F2></span> during initial [[POST]].]]		[[image:Fujitsu-BIOS-F2.png\|thumb\|center\|665px\|Fujitsu Primergy S8 - BIOS - Press <span class="code"><F2></span> during initial [[POST]].]]

	When you first power on a Fujitsu Primergy server, it will take a minute or so for anything to show on the screen. This is normal, particularly after [[AC]] was disconnected.		When you first power on a Fujitsu Primergy server, it will take a minute or so for anything to show on the screen. This is normal, particularly after [[AC]] was disconnected.
Line 19:		Line 19:
	The machine will continue to boot, scanning the RAID controller in the process. Once done, it will enter the BIOS scree.		The machine will continue to boot, scanning the RAID controller in the process. Once done, it will enter the BIOS scree.

	[[image:Fujitsu_BIOS_Main-page.png\|thumb\|center\|~~400px~~\|Fujitsu Primergy S8 - BIOS - <span class="code">Main</span> page]]		[[image:Fujitsu_BIOS_Main-page.png\|thumb\|center\|665px\|Fujitsu Primergy S8 - BIOS - <span class="code">Main</span> page]]

	The first page you will see is the <span class="code">Main</span> BIOS page.		The first page you will see is the <span class="code">Main</span> BIOS page.
Line 35:		Line 35:
	{{note\|1=To navigate the BIOS pages, use your left and right arrow keys. One you are on the page you want, press the up and down keys to moved between the items. Press '<span class="code"><enter></span>' to edit an item's value.}}		{{note\|1=To navigate the BIOS pages, use your left and right arrow keys. One you are on the page you want, press the up and down keys to moved between the items. Press '<span class="code"><enter></span>' to edit an item's value.}}

	[[image:Fujitsu_BIOS_Advanced-page.png\|thumb\|center\|~~400px~~\|Fujitsu Primergy S8 - BIOS - <span class="code">Advanced</span> page]]		[[image:Fujitsu_BIOS_Advanced-page.png\|thumb\|center\|665px\|Fujitsu Primergy S8 - BIOS - <span class="code">Advanced</span> page]]

	Press the '<span class="code">right</span>' arrow key to switch to the '<span class="code">Advanced</span>' page.		Press the '<span class="code">right</span>' arrow key to switch to the '<span class="code">Advanced</span>' page.

	[[image:Fujitsu_BIOS_Onboard-Devices-Configuration.png\|thumb\|center\|~~400px~~\|Fujitsu Primergy S8 - BIOS - <span class="code">Onboard Devices Configuration</span> page]]		[[image:Fujitsu_BIOS_Onboard-Devices-Configuration.png\|thumb\|center\|665px\|Fujitsu Primergy S8 - BIOS - <span class="code">Onboard Devices Configuration</span> page]]

	Press the '<span class="code">down</span>' key to highlight "<span class="code">Onboard Devices Configuration</span>" and press '<span class="code"><enter></span>'.		Press the '<span class="code">down</span>' key to highlight "<span class="code">Onboard Devices Configuration</span>" and press '<span class="code"><enter></span>'.

	[[image:Fujitsu_BIOS_LAN-Controller-Oprom.png\|thumb\|center\|~~400px~~\|Fujitsu Primergy S8 - BIOS - <span class="code">LAN Oprom</span> settings]]		[[image:Fujitsu_BIOS_LAN-Controller-Oprom.png\|thumb\|center\|665px\|Fujitsu Primergy S8 - BIOS - <span class="code">LAN Oprom</span> settings]]

	You will an option to enable or disable the onboard [[LAN]] (network) interfaces followed by an option to set if each is bootable and, if so, using what protocol.		You will an option to enable or disable the onboard [[LAN]] (network) interfaces followed by an option to set if each is bootable and, if so, using what protocol.
Line 53:		Line 53:
	* <span class="code">iSCSI</span> is a way to use raw storage from a device on the network as if it was a local hard drive. Setting a NIC to '<span class="code">iSCSI</span>' boot mode tells the system to reach out over the network to find its "hard drive" to boot from.		* <span class="code">iSCSI</span> is a way to use raw storage from a device on the network as if it was a local hard drive. Setting a NIC to '<span class="code">iSCSI</span>' boot mode tells the system to reach out over the network to find its "hard drive" to boot from.

	[[image:Fujitsu_BIOS_LAN-Controller_PXE-Enabled.png\|thumb\|center\|~~400px~~\|Fujitsu Primergy S8 - BIOS - <span class="code">[[PXE]]</span> booting enabled]]		[[image:Fujitsu_BIOS_LAN-Controller_PXE-Enabled.png\|thumb\|center\|665px\|Fujitsu Primergy S8 - BIOS - <span class="code">[[PXE]]</span> booting enabled]]

	Now we can select either onboard interface to boot off of!		Now we can select either onboard interface to boot off of!
Line 59:		Line 59:
	{{note\|1=It's outside the scope of this tutorial, but if you have hardware RAID and no optical drive, you can disable the onboard SATA to reduce boot times.}}		{{note\|1=It's outside the scope of this tutorial, but if you have hardware RAID and no optical drive, you can disable the onboard SATA to reduce boot times.}}

	[[image:Fujitsu_BIOS_Save-and-Exit.png\|thumb\|center\|~~400px~~\|Fujitsu Primergy S8 - BIOS - <span class="code">Save and Exit</span> page]]		[[image:Fujitsu_BIOS_Save-and-Exit.png\|thumb\|center\|665px\|Fujitsu Primergy S8 - BIOS - <span class="code">Save and Exit</span> page]]

	Now to save and exit.		Now to save and exit.
Line 71:		Line 71:
	If you want to enable booting off of add-in network cards, you will need to tell the BIOS to look at them during boot.		If you want to enable booting off of add-in network cards, you will need to tell the BIOS to look at them during boot.

	[[image:Fujitsu_RX200S8_Mainboard-Label.jpg\|thumb\|center\|~~400px~~\|Fujitsu Primergy RX200 S8 - Mainboard layout label]]		[[image:Fujitsu_RX200S8_Mainboard-Label.jpg\|thumb\|center\|665px\|Fujitsu Primergy RX200 S8 - Mainboard layout label]]

	To do this, you need to know which PCIe slot the add-in card is plugged into. Depending on your hardware server model, this should either be stamped into the metal near each expansion slot and/or shown on a label inside the server itself.		To do this, you need to know which PCIe slot the add-in card is plugged into. Depending on your hardware server model, this should either be stamped into the metal near each expansion slot and/or shown on a label inside the server itself.
Line 79:		Line 79:
	Boot the computer and press <span class="code"><F2></span> to go back into the BIOS as before.		Boot the computer and press <span class="code"><F2></span> to go back into the BIOS as before.

	[[image:Fujitsu_BIOS_Advanced-Menu_Option-ROM.png\|thumb\|center\|~~400px~~\|Fujitsu Primergy S8 - BIOS - <span class="code">Advanced</span> -> <span class="code">Option ROM Configuration</span>]]		[[image:Fujitsu_BIOS_Advanced-Menu_Option-ROM.png\|thumb\|center\|665px\|Fujitsu Primergy S8 - BIOS - <span class="code">Advanced</span> -> <span class="code">Option ROM Configuration</span>]]

	Navigate to the '<span class="code">Advanced</span>' menu and go down to the "<span class="code">Option ROM Configuration</span>" item and press '<span class="code"><enter></span>'.		Navigate to the '<span class="code">Advanced</span>' menu and go down to the "<span class="code">Option ROM Configuration</span>" item and press '<span class="code"><enter></span>'.

	[[image:Fujitsu_BIOS_Option-ROM_Enable-Slots.png\|thumb\|center\|~~400px~~\|Fujitsu Primergy S8 - BIOS - <span class="code">Option ROM Configuration</span> menu]]		[[image:Fujitsu_BIOS_Option-ROM_Enable-Slots.png\|thumb\|center\|665px\|Fujitsu Primergy S8 - BIOS - <span class="code">Option ROM Configuration</span> menu]]

	Change the '<span class="code">Launch Slot X OpROM</span>' to '<span class="code">Enabled</span>' for the slots with NICs installed in them.		Change the '<span class="code">Launch Slot X OpROM</span>' to '<span class="code">Enabled</span>' for the slots with NICs installed in them.
Line 93:		Line 93:
	{{note\|1=The screen prompting for you to press '<span class="code"><F12></span>' to select boot might pass quickly. You can start pressing '<span class="code"><F12></span>' before seeing the prompt and it will still provide the boot selection menu.}}		{{note\|1=The screen prompting for you to press '<span class="code"><F12></span>' to select boot might pass quickly. You can start pressing '<span class="code"><F12></span>' before seeing the prompt and it will still provide the boot selection menu.}}

	[[image:Fujitsu_BIOS_Boot-Prompt.png\|thumb\|center\|~~400px~~\|Fujitsu Primergy S8 - BIOS boot prompt]]		[[image:Fujitsu_BIOS_Boot-Prompt.png\|thumb\|center\|665px\|Fujitsu Primergy S8 - BIOS boot prompt]]

	During the boot of the machine, you will see a prompt to press '<span class="code"><F12></span>' to "<span class="code">enter Boot Menu</span>".		During the boot of the machine, you will see a prompt to press '<span class="code"><F12></span>' to "<span class="code">enter Boot Menu</span>".
Line 99:		Line 99:
	Press '<span class="code"><F12></span>' and then wait. The machine needs to scan a few things, like the RAID controller, before the boot device selection window appears.		Press '<span class="code"><F12></span>' and then wait. The machine needs to scan a few things, like the RAID controller, before the boot device selection window appears.

	[[image:Fujitsu_BIOS_Boot-Device-Menu.png\|thumb\|center\|~~400px~~\|Fujitsu Primergy S8 - Boot device menu]]		[[image:Fujitsu_BIOS_Boot-Device-Menu.png\|thumb\|center\|665px\|Fujitsu Primergy S8 - Boot device menu]]

	And there you have it!		And there you have it!
Line 368:		Line 368:
	That's it!		That's it!

	[[image:Fujitsu_BIOS_Boot-Prompt_All-NICs-PXE-Bootable.png\|thumb\|center\|~~400px~~\|Fujitsu Primergy S8 - BIOS boot prompt - All NICs now PXE bootable]]		[[image:Fujitsu_BIOS_Boot-Prompt_All-NICs-PXE-Bootable.png\|thumb\|center\|665px\|Fujitsu Primergy S8 - BIOS boot prompt - All NICs now PXE bootable]]

	When the node reboots, you should be able to see all adapters as PXE bootable when you press <span class="code"><F12></span> during the boot process.		When the node reboots, you should be able to see all adapters as PXE bootable when you press <span class="code"><F12></span> during the boot process.