https://alteeve.com/w/index.php?action=history&feed=atom&title=Generic_c5.ksGeneric c5.ks - Revision history2026-04-23T20:44:31ZRevision history for this page on the wikiMediaWiki 1.42.3https://alteeve.com/w/index.php?title=Generic_c5.ks&diff=3091&oldid=prevDigimer: Created page with '{{header}} This is a generic CentOS 5.x kickstart file. It has a minimal package list and can be used on most bare-iron servers with at least 45 GiB of disk space and Xe…'2011-04-13T13:01:03Z<p>Created page with '{{header}} This is a generic <a href="/w/CentOS" title="CentOS">CentOS</a> 5.x kickstart file. It has a minimal package list and can be used on most bare-iron servers with at least 45 <a href="/w/GiB" title="GiB">GiB</a> of disk space and Xe…'</p>
<p><b>Páàjì titun</b></p><div>{{header}}<br />
<br />
This is a generic [[CentOS]] 5.x kickstart file. It has a minimal package list and can be used on most bare-iron servers with at least 45 [[GiB]] of disk space and Xen [[VM]] installs with at least 10 [[GiB]] of space.<br />
<br />
<source lang="bash"><br />
# Kickstart file created by Madison Kelly (mkelly@iplink.net<br />
#<br />
# For:<br />
# Centos 5.6, AN!Cluster Generic, minimal bare-iron and VM installer.<br />
# - May work with other versions but not tested.<br />
#<br />
<br />
text <br />
install<br />
url --url=http://192.168.1.254/c5/x86_64/img/<br />
lang en_US.UTF-8<br />
keyboard us<br />
timezone --utc America/Toronto<br />
network --device eth0 --bootproto dhcp --onboot yes --hostname generic-new.alteeve.com<br />
authconfig --enableshadow --passalgo=sha512 --enablefingerprint<br />
# Password is 'initial'.<br />
rootpw --iscrypted $6$0riSEDMyCvHPdhCv$lvuhEOqU2yo9szCJHtAsVUK3maHyWlpZmVi6PCRkrOfifL/38J7SaGUopehv/rzwQvhqxNla/jPvD10uwuPY4/<br />
firewall --disabled<br />
selinux --disabled<br />
firstboot --disable<br />
reboot<br />
services --disabled NetworkManager,iptables,iptables,ip6tables<br />
services --enabled network<br />
<br />
# This will run whatever was created by the script below.<br />
%include /tmp/part-include<br />
<br />
%packages<br />
@base<br />
@core<br />
@editors<br />
@gnome-desktop<br />
@graphical-internet<br />
@text-internet<br />
@base-x<br />
keyutils<br />
trousers<br />
fipscheck<br />
device-mapper-multipath<br />
lynx<br />
xorg-x11-server-Xnest<br />
slocate<br />
-ksh<br />
-lftp<br />
-unzip<br />
-mgetty<br />
-dosfstools<br />
-sendmail<br />
-pcmciautils<br />
-mlocate<br />
-nfs-utils<br />
-mkbootdisk<br />
-irda-utils<br />
-bluez-utils<br />
-talk<br />
-gnome-user-docs<br />
-gnome-themes<br />
-gnome-power-manager<br />
-evince<br />
-alacarte<br />
-gnome-backgrounds<br />
-gok<br />
-gnome-audio<br />
-gnome-user-share<br />
-NetworkManager-gnome<br />
-gimp-print-utils<br />
-im-chooser<br />
-file-roller<br />
-gnome-mag<br />
-nautilus-sendto<br />
-eog<br />
-gnome-screensaver<br />
-gnome-pilot<br />
-orca<br />
-evolution<br />
-nspluginwrapper<br />
-gnome-themes<br />
-evolution-webcal<br />
-ekiga<br />
-evolution-connector<br />
-slrn<br />
-fetchmail<br />
-mutt<br />
-cadaver<br />
-rhgb<br />
-linuxwacom<br />
<br />
### Script to setup partitions.<br />
%pre --log=/tmp/ks-preinstall.log<br />
<br />
#!/bin/sh<br />
<br />
# Prepare the disks in the script below. It checks '/proc/partitions' to see<br />
# what configuration to use.<br />
<br />
### Some detection.<br />
if grep -q "cciss/c0d0" /proc/partitions; then<br />
### No RAID is needed at the software level, it's managed by the controller.<br />
cat >> /tmp/part-include <<END<br />
zerombr<br />
clearpart --linux --drives=cciss/c0d0<br />
ignoredisk --only-use=cciss/c0d0<br />
bootloader --location=mbr --driveorder=cciss/c0d0 --append="crashkernel=auto"<br />
<br />
part /boot --fstype ext3 --size=256 --asprimary<br />
part swap --fstype swap --size=4096 --asprimary<br />
part / --fstype ext3 --size=40960 --asprimary<br />
END<br />
elif grep -q "cciss/c1d0" /proc/partitions; then<br />
### No RAID is needed at the software level, it's managed by the controller.<br />
cat >> /tmp/part-include <<END<br />
zerombr<br />
clearpart --linux --drives=cciss/c1d0<br />
ignoredisk --only-use=cciss/c1d0<br />
bootloader --location=mbr --driveorder=cciss/c1d0 --append="crashkernel=auto"<br />
<br />
part /boot --fstype ext3 --size=256 --asprimary<br />
part swap --fstype swap --size=4096 --asprimary<br />
part / --fstype ext3 --size=40960 --asprimary<br />
END<br />
elif grep -q hdb /proc/partitions; then<br />
### /dev/hdX RAID 1<br />
cat >> /tmp/part-include <<END<br />
zerombr<br />
clearpart --all --initlabel --drives=hda,hdb<br />
ignoredisk --only-use=hda,hdb<br />
bootloader --location=mbr --driveorder=hda,hdb --append="crashkernel=auto"<br />
<br />
# /boot<br />
part raid.01 --ondisk=sda --asprimary --size=256<br />
part raid.02 --ondisk=sdb --asprimary --size=256<br />
# /<br />
part raid.11 --ondisk=sda --asprimary --size=40960<br />
part raid.12 --ondisk=sdb --asprimary --size=40960<br />
# <swap><br />
part raid.21 --ondisk=sda --asprimary --size=4096<br />
part raid.22 --ondisk=sdb --asprimary --size=4096<br />
<br />
# Format /boot and /.<br />
raid /boot --fstype=ext3 --level=1 --device=md0 raid.01 raid.02<br />
raid / --fstype=ext3 --level=1 --device=md1 raid.11 raid.12<br />
raid swap --fstype=swap --level=1 --device=md2 raid.21 raid.22<br />
END<br />
elif grep -q hda /proc/partitions; then<br />
### /dev/hda single<br />
cat >> /tmp/part-include <<END<br />
zerombr<br />
clearpart --linux --drives=hda<br />
ignoredisk --only-use=hda<br />
bootloader --location=mbr --driveorder=hda --append="crashkernel=auto"<br />
<br />
part /boot --fstype ext3 --size=256 --asprimary<br />
part swap --fstype swap --size=4096 --asprimary<br />
part / --fstype ext3 --size=40960 --asprimary<br />
END<br />
elif grep -q sdf /proc/partitions; then<br />
### /dev/sdX RAID - This should be the majority.<br />
# 6-Drive RAID 5 w/ 1 hot spare<br />
cat >> /tmp/part-include <<END<br />
zerombr<br />
clearpart --all --initlabel --drives=sda,sdb,sdc,sdd,sde,sdf<br />
ignoredisk --only-use=sda,sdb,sdc,sdd,sde,sdf<br />
bootloader --location=mbr --driveorder=sda,sdb,sdc,sdd,sde,sdf --append="crashkernel=auto"<br />
<br />
## This will create a 6-drive RAID 5 array.<br />
# The '/boot' partition. A little nuts at 6x RAID 1 but meh, what else would I<br />
# use the 256MB parts for?<br />
part raid.01 --size=256 --ondisk=sda<br />
part raid.02 --size=256 --ondisk=sdb<br />
part raid.03 --size=256 --ondisk=sdc<br />
part raid.04 --size=256 --ondisk=sdd<br />
part raid.05 --size=256 --ondisk=sde<br />
part raid.06 --size=256 --ondisk=sdf<br />
<br />
# The swap partition. Set to RAID 5, so it's actually ~5GB. It's RAID'ed and<br />
# not individual parts because a loss of swap can still brind down a system.<br />
part raid.11 --size=1024 --ondisk=sda<br />
part raid.12 --size=1024 --ondisk=sdb<br />
part raid.13 --size=1024 --ondisk=sdc<br />
part raid.14 --size=1024 --ondisk=sdd<br />
part raid.15 --size=1024 --ondisk=sde<br />
part raid.16 --size=1024 --ondisk=sdf<br />
<br />
# This is the main '/' partition for 'dom0'. The remainder of the disk space<br />
# will be hand-crafted into a RAID 5 partition post install for either DRBD or<br />
# iSCSI.<br />
part raid.21 --size=10240 --ondisk=sda<br />
part raid.22 --size=10240 --ondisk=sdb<br />
part raid.23 --size=10240 --ondisk=sdc<br />
part raid.24 --size=10240 --ondisk=sdd<br />
part raid.25 --size=10240 --ondisk=sde<br />
part raid.26 --size=10240 --ondisk=sdf<br />
<br />
# RAID configure.<br />
raid /boot --fstype=ext3 --level=1 --spares=1 --device=md0 raid.01 raid.02 raid.03 raid.04 raid.05 raid.06<br />
raid swap --level=5 --spares=1 --device=md1 raid.11 raid.12 raid.13 raid.14 raid.15 raid.16<br />
raid / --fstype=ext4 --level=5 --spares=1 --device=md2 raid.21 raid.22 raid.23 raid.24 raid.25 raid.26<br />
END<br />
elif grep -q sde /proc/partitions; then<br />
### /dev/sdX RAID - This should be the majority.<br />
# 5-Drive RAID 5<br />
cat >> /tmp/part-include <<END<br />
zerombr<br />
clearpart --all --initlabel --drives=sda,sdb,sdc,sdd,sde<br />
ignoredisk --only-use=sda,sdb,sdc,sdd,sde<br />
bootloader --location=mbr --driveorder=sda,sdb,sdc,sdd,sde --append="crashkernel=auto"<br />
<br />
<br />
## This will create a 5-drive RAID 5 array.<br />
# The '/boot' partition. A little nuts at 6x RAID 1 but meh, what else would I<br />
# use the 256MB parts for?<br />
part raid.01 --size=256 --ondisk=sda<br />
part raid.02 --size=256 --ondisk=sdb<br />
part raid.03 --size=256 --ondisk=sdc<br />
part raid.04 --size=256 --ondisk=sdd<br />
part raid.05 --size=256 --ondisk=sde<br />
<br />
# The swap partition. Set to RAID 5, so it's actually ~5GB. It's RAID'ed and<br />
# not individual parts because a loss of swap can still brind down a system.<br />
part raid.11 --size=1024 --ondisk=sda<br />
part raid.12 --size=1024 --ondisk=sdb<br />
part raid.13 --size=1024 --ondisk=sdc<br />
part raid.14 --size=1024 --ondisk=sdd<br />
part raid.15 --size=1024 --ondisk=sde<br />
<br />
# This is the main '/' partition for 'dom0'. The remainder of the disk space<br />
# will be hand-crafted into a RAID 5 partition post install for either DRBD or<br />
# iSCSI.<br />
part raid.21 --size=10240 --ondisk=sda<br />
part raid.22 --size=10240 --ondisk=sdb<br />
part raid.23 --size=10240 --ondisk=sdc<br />
part raid.24 --size=10240 --ondisk=sdd<br />
part raid.25 --size=10240 --ondisk=sde<br />
<br />
# RAID configure.<br />
raid /boot --fstype=ext3 --level=1 --device=md0 raid.01 raid.02 raid.03 raid.04 raid.05<br />
raid swap --level=5 --device=md1 raid.11 raid.12 raid.13 raid.14 raid.15<br />
raid / --fstype=ext4 --level=5 --device=md2 raid.21 raid.22 raid.23 raid.24 raid.25<br />
END<br />
elif grep -q sdd /proc/partitions; then<br />
### /dev/sdX RAID - This should be the majority.<br />
# 4-Drive RAID 5<br />
cat >> /tmp/part-include <<END<br />
zerombr<br />
clearpart --all --initlabel --drives=sda,sdb,sdc,sdd<br />
ignoredisk --only-use=sda,sdb,sdc,sdd<br />
bootloader --location=mbr --driveorder=sda,sdb,sdc,sdd --append="crashkernel=auto"<br />
<br />
## This will create a 4-drive RAID 5 array.<br />
# The '/boot' partition. A little nuts at 6x RAID 1 but meh, what else would I<br />
# use the 256MB parts for?<br />
part raid.01 --size=256 --ondisk=sda<br />
part raid.02 --size=256 --ondisk=sdb<br />
part raid.03 --size=256 --ondisk=sdc<br />
part raid.04 --size=256 --ondisk=sdd<br />
<br />
# The swap partition. Set to RAID 5, so it's actually ~8GB. It's RAID'ed and<br />
# not individual parts because a loss of swap can still brind down a system.<br />
part raid.11 --size=2048 --ondisk=sda<br />
part raid.12 --size=2048 --ondisk=sdb<br />
part raid.13 --size=2048 --ondisk=sdc<br />
part raid.14 --size=2048 --ondisk=sdd<br />
<br />
# This is the main '/' partition for 'dom0'. The remainder of the disk space<br />
# will be hand-crafted into a RAID 5 partition post install for either DRBD or<br />
# iSCSI.<br />
part raid.21 --size=20480 --ondisk=sda<br />
part raid.22 --size=20480 --ondisk=sdb<br />
part raid.23 --size=20480 --ondisk=sdc<br />
part raid.24 --size=20480 --ondisk=sdd<br />
<br />
# RAID configure.<br />
raid /boot --fstype=ext3 --level=1 --device=md0 raid.01 raid.02 raid.03 raid.04<br />
raid swap --level=5 --device=md1 raid.11 raid.12 raid.13 raid.14<br />
raid / --fstype=ext4 --level=5 --device=md2 raid.21 raid.22 raid.23 raid.24<br />
END<br />
elif grep -q sdc /proc/partitions; then<br />
### /dev/sdX RAID - This should be the majority.<br />
# 3-Drive RAID 5<br />
cat >> /tmp/part-include <<END<br />
zerombr<br />
clearpart --all --initlabel --drives=sda,sdb,sdc<br />
ignoredisk --only-use=sda,sdb,sdc<br />
bootloader --location=mbr --driveorder=sda,sdb,sdc --append="crashkernel=auto"<br />
<br />
## This will create a 3-drive RAID 5 array.<br />
# The '/boot' partition. A little nuts at 6x RAID 1 but meh, what else would I<br />
# use the 256MB parts for?<br />
part raid.01 --size=256 --ondisk=sda<br />
part raid.02 --size=256 --ondisk=sdb<br />
part raid.03 --size=256 --ondisk=sdc<br />
<br />
# The swap partition. Set to RAID 5, so it's actually ~4GB. It's RAID'ed and<br />
# not individual parts because a loss of swap can still brind down a system.<br />
part raid.11 --size=2048 --ondisk=sda<br />
part raid.12 --size=2048 --ondisk=sdb<br />
part raid.13 --size=2048 --ondisk=sdc<br />
<br />
# This is the main '/' partition for 'dom0'. The remainder of the disk space<br />
# will be hand-crafted into a RAID 5 partition post install for either DRBD or<br />
# iSCSI.<br />
part raid.21 --size=20480 --ondisk=sda<br />
part raid.22 --size=20480 --ondisk=sdb<br />
part raid.23 --size=20480 --ondisk=sdc<br />
<br />
# RAID configure.<br />
raid /boot --fstype=ext3 --level=1 --device=md0 raid.01 raid.02 raid.03<br />
raid swap --level=5 --device=md1 raid.11 raid.12 raid.13<br />
raid / --fstype=ext4 --level=5 --device=md2 raid.21 raid.22 raid.23<br />
END<br />
elif grep -q sdb /proc/partitions; then<br />
### /dev/sdX RAID - This should be the majority.<br />
# 2-Drive RAID 1<br />
cat >> /tmp/part-include <<END<br />
zerombr<br />
clearpart --all --initlabel --drives=sda,sdb<br />
ignoredisk --only-use=sda,sdb<br />
bootloader --location=mbr --driveorder=sda,sdb --append="crashkernel=auto"<br />
<br />
# /boot<br />
part raid.01 --ondisk=sda --asprimary --size=256<br />
part raid.02 --ondisk=sdb --asprimary --size=256<br />
# /<br />
part raid.11 --ondisk=sda --asprimary --size=40960<br />
part raid.12 --ondisk=sdb --asprimary --size=40960<br />
# <swap><br />
part raid.21 --ondisk=sda --asprimary --size=4096<br />
part raid.22 --ondisk=sdb --asprimary --size=4096<br />
<br />
# Format /boot and /.<br />
raid /boot --fstype=ext3 --level=1 --device=md0 raid.01 raid.02<br />
raid / --fstype=ext3 --level=1 --device=md1 raid.11 raid.12<br />
raid swap --fstype=swap --level=1 --device=md2 raid.21 raid.22<br />
END<br />
elif grep -q sda /proc/partitions; then<br />
### /dev/sda Single drive, or hardware RAID<br />
cat >> /tmp/part-include <<END<br />
zerombr<br />
clearpart --linux --drives=sda<br />
ignoredisk --only-use=sda<br />
bootloader --location=mbr --driveorder=sda --append="crashkernel=auto"<br />
<br />
part /boot --fstype ext3 --size=256 --asprimary<br />
part swap --fstype swap --size=4096 --asprimary<br />
part / --fstype ext3 --size=40960 --asprimary<br />
END<br />
elif grep -q xvda /proc/partitions; then<br />
### /dev/xvda Xen virtual disk<br />
# This kickstart is designed may be used as a generic Xen VM, which is<br />
# likely to have minimal diskspace, so we'll knock down the allocated<br />
# swap and set a modest and growable '/' partition.<br />
cat >> /tmp/part-include <<END<br />
zerombr<br />
clearpart --linux --drives=xvda<br />
ignoredisk --only-use=xvda<br />
bootloader --location=mbr --driveorder=xvda --append="crashkernel=auto"<br />
<br />
part /boot --fstype ext3 --size=256 --asprimary<br />
part swap --fstype swap --size=1024 --asprimary<br />
part / --fstype ext3 --size=100 --asprimary --grow<br />
END<br />
fi<br />
<br />
%end<br />
</source><br />
<br />
{{footer}}</div>Digimer