ScanCore
|
Alteeve Wiki :: How To :: ScanCore |
 |
Warning: This is little more that raw notes, do not consider anything here to be valid or accurate at this time. |
Installing
PostgreSQL Setup
yum install -y postgresql postgresql-server postgresql-plperl postgresql-contrib postgresql-libs Scanner
...
Complete!
DB config:
/etc/init.d/postgresql initdb
Initializing database: [ OK ]
Start
/etc/init.d/postgresql start
Starting postgresql service: [ OK ]
Create the striker user.
su - postgres -c "createuser --no-superuser --createdb --no-createrole striker"
# no output expected
Set 'postgres' and 'striker' user passwords:
su - postgres -c "psql -U postgres"
psql (8.4.20)
Type "help" for help.
postgres=# \password
Enter new password:
Enter it again:
postgres=# \password striker
Enter new password:
Enter it again:
Exit.
postgres=# \q
|
Warning: In the below example, the BCN is 10.20.0.0/16 and the IFN is 192.168.199.0/24. If you have different networks, be sure to adjust your values accordingly! |
Configure access:
cp /var/lib/pgsql/data/pg_hba.conf /var/lib/pgsql/data/pg_hba.conf.striker
vim /var/lib/pgsql/data/pg_hba.conf
diff -u /var/lib/pgsql/data/pg_hba.conf.striker /var/lib/pgsql/data/pg_hba.conf
--- /var/lib/pgsql/data/pg_hba.conf.striker 2015-03-05 14:33:40.902733374 +0000
+++ /var/lib/pgsql/data/pg_hba.conf 2015-03-05 14:34:44.861733318 +0000
@@ -65,9 +65,13 @@
# TYPE DATABASE USER CIDR-ADDRESS METHOD
+# dashboards
+host all all 192.168.199.0/24 md5
+# node servers
+host all all 10.20.0.0/16 md5
# "local" is for Unix domain socket connections only
-local all all ident
+local all all md5
# IPv4 local connections:
host all all 127.0.0.1/32 ident
# IPv6 local connections:
cp /var/lib/pgsql/data/postgresql.conf /var/lib/pgsql/data/postgresql.conf.striker
vim /var/lib/pgsql/data/postgresql.conf
diff -u /var/lib/pgsql/data/postgresql.conf.striker /var/lib/pgsql/data/postgresql.conf
--- /var/lib/pgsql/data/postgresql.conf.striker 2015-03-05 14:35:35.388733307 +0000
+++ /var/lib/pgsql/data/postgresql.conf 2015-03-05 14:36:07.111733159 +0000
@@ -56,7 +56,7 @@
# - Connection Settings -
-#listen_addresses = 'localhost' # what IP address(es) to listen on;
+listen_addresses = '*' # what IP address(es) to listen on;
# comma-separated list of addresses;
# defaults to 'localhost', '*' = all
# (change requires restart)
/etc/init.d/postgresql restart
Stopping postgresql service: [ OK ]
Starting postgresql service: [ OK ]
Striker Database Setup
Create DB:
su - postgres -c "createdb --owner striker scanner"
Password:
The SQL files we need to load are found in the /etc/striker/SQL directory.
The core SQL file is
ls -lah /etc/striker/SQL/
total 64K
drwxr-xr-x. 2 root root 4.0K Mar 4 23:50 .
drwxr-xr-x. 5 root root 4.0K Mar 4 23:50 ..
-rw-r--r--. 1 root root 397 Mar 4 23:41 00_drop_db.sql
-rw-r--r--. 1 root root 2.5K Mar 4 23:41 01_create_node.sql
-rw-r--r--. 1 root root 3.2K Mar 4 23:41 02_create_alerts.sql
-rw-r--r--. 1 root root 1.9K Mar 4 23:41 03_create_alert_listeners.sql
-rw-r--r--. 1 root root 1.3K Mar 4 23:41 04_load_alert_listeners.sql
-rw-r--r--. 1 root root 3.2K Mar 4 23:41 05_create_random_agent.sql
-rw-r--r--. 1 root root 3.4K Mar 4 23:41 06a_create_snm_apc_pdu.sql
-rw-r--r--. 1 root root 3.6K Mar 4 23:41 06b_create_snmp_brocade_switch.sql
-rw-r--r--. 1 root root 3.4K Mar 4 23:41 06_create_snm_apc_ups.sql
-rw-r--r--. 1 root root 3.5K Mar 4 23:41 07_create_ipmi.sql
-rw-r--r--. 1 root root 5.9K Mar 4 23:41 08_create_raid.sql
-rw-r--r--. 1 root root 3.8K Mar 4 23:41 09_create_bonding.sql
-rw-r--r--. 1 root root 1.2K Mar 4 23:41 Makefile
 |
Note: The default is that the database owner name is striker. If you used a different database name owner, please update the .sql files with the command sed -i 's/striker/yourname/' *.sql. |
Load the SQL tables into the database.
cd Scanner/SQL/
ls -lah
total 40K
drwxr-xr-x. 2 root root 4.0K Jan 16 15:18 .
drwxr-xr-x. 13 root root 4.0K Jan 16 15:18 ..
-rw-r--r--. 1 root root 3.3K Jan 16 15:18 01_create_node.sql
-rw-r--r--. 1 root root 3.3K Jan 16 15:18 02_create_alerts.sql
-rw-r--r--. 1 root root 2.5K Jan 16 15:18 03_create_alert_listeners.sql
-rw-r--r--. 1 root root 1.2K Jan 16 15:18 04_load_alert_listeners.sql
-rw-r--r--. 1 root root 3.3K Jan 16 15:18 05_create_random_agent.sql
-rw-r--r--. 1 root root 3.4K Jan 16 15:18 06_create_snm_apc_ups.sql
-rw-r--r--. 1 root root 3.3K Jan 16 15:18 07_create_ipmi.sql
-rw-r--r--. 1 root root 3.3K Jan 16 15:18 08_create_raid.sql
Load SQL files
The default is that the database owner name is striker
These are currently hard-coded to 'alteeve' user, switch to the 'striker' user.
sed -i 's/striker/yourname/' *
# Enter the password sooooo many times ;_;
Test:
psql -U striker -d scanner -c "SELECT * FROM alert_listeners"
Password for user striker:
id | name | mode | level | contact_info | language | added_by | updated
----+----------------+---------------+---------+----------------+----------+----------+-------------------------------
1 | screen | Screen | DEBUG | screen | en_CA | 0 | 2014-12-11 14:42:13.273057-05
2 | Tom Legrady | Email | DEBUG | tom@striker.ca | en_CA | 0 | 2014-12-11 16:54:25.477321-05
3 | Health Monitor | HealthMonitor | WARNING | | en_CA | 0 | 2015-01-14 14:08:15-05
(3 rows)
Done!
Configure Scan Core on a Node
Install dependencies:
- TODO - postgresql (client only)
Clone the git repo:
git clone https://github.com/digimer/striker.git
Initialized empty Git repository in /root/striker/.git/
remote: Counting objects: 3602, done.
remote: Compressing objects: 100% (57/57), done.
remote: Total 3602 (delta 25), reused 0 (delta 0)
Receiving objects: 100% (3602/3602), 7.88 MiB | 586 KiB/s, done.
Resolving deltas: 100% (2307/2307), done.
cd striker/
git checkout scanner
Switched to branch 'scanner'
git pull origin scanner
From https://github.com/digimer/striker
* branch scanner -> FETCH_HEAD
Merge made by recursive.
.gitignore | 19 +
Scanner/Agents/ipmi | 257 +
Scanner/Agents/raid | 257 +
Scanner/Agents/random-agent | 278 +
Scanner/Agents/snmp_apc_ups | 271 +
Scanner/Bin/clean | 20 +
Scanner/Bin/db | 130 +
Scanner/Bin/dbclean | 10 +
Scanner/Bin/dbclean_cmds | 5 +
Scanner/Config/db.conf | 7 +
Scanner/Config/ipmi.conf | 246 +
Scanner/Config/raid.conf | 50 +
Scanner/Config/scanner.conf | 39 +
Scanner/Config/snmp_apc_ups.conf | 203 +
...ng_an_agent_by_extending_existing_perl_classes. | 299 +
Scanner/MIB/powernet412.mib.txt |70988 ++++++++++++++++++++
Scanner/Makefile | 86 +
Scanner/Messages/ipmi.xml | 33 +
Scanner/Messages/raid.xml | 33 +
Scanner/Messages/random-agent.xml | 31 +
Scanner/Messages/scanner.xml | 30 +
Scanner/Messages/snmp_apc_ups.xml | 37 +
Scanner/RPMS/load_rpm_packages.sh | 66 +
.../RPMS/perl-Capture-Tiny-0.27-1.el6.noarch.rpm | Bin 0 -> 26684 bytes
.../RPMS/perl-Class-Tiny-1.000-1.rhel6.noarch.rpm | Bin 0 -> 26280 bytes
Scanner/RPMS/perl-Clone-0.37-1.el6.x86_64.rpm | Bin 0 -> 14072 bytes
.../perl-Clone-debuginfo-0.37-1.el6.x86_64.rpm | Bin 0 -> 28724 bytes
.../RPMS/perl-Const-Fast-0.006-1.el6.noarch.rpm | Bin 0 -> 17024 bytes
Scanner/RPMS/perl-Crypt-CBC-2.33-1.el6.noarch.rpm | Bin 0 -> 27504 bytes
Scanner/RPMS/perl-Crypt-DES-2.07-1.el6.x86_64.rpm | Bin 0 -> 15168 bytes
.../perl-Crypt-DES-debuginfo-2.07-1.el6.x86_64.rpm | Bin 0 -> 33232 bytes
.../RPMS/perl-Data-OptList-0.109-1.el6.noarch.rpm | Bin 0 -> 16604 bytes
...l-Devel-GlobalDestruction-0.13-1.el6.noarch.rpm | Bin 0 -> 8344 bytes
...evel-GlobalDestruction-XS-0.01-1.el6.x86_64.rpm | Bin 0 -> 9420 bytes
...lDestruction-XS-debuginfo-0.01-1.el6.x86_64.rpm | Bin 0 -> 25800 bytes
.../RPMS/perl-Exporter-Tiny-0.042-1.el6.noarch.rpm | Bin 0 -> 31612 bytes
Scanner/RPMS/perl-Net-SNMP-v6.0.1-1.el6.noarch.rpm | Bin 0 -> 103156 bytes
Scanner/RPMS/perl-Net-SSH2-0.53-1.el6.x86_64.rpm | Bin 0 -> 88340 bytes
.../perl-Net-SSH2-debuginfo-0.53-1.el6.x86_64.rpm | Bin 0 -> 97188 bytes
.../RPMS/perl-Params-Util-1.07-1.el6.x86_64.rpm | Bin 0 -> 34748 bytes
...erl-Params-Util-debuginfo-1.07-1.el6.x86_64.rpm | Bin 0 -> 30988 bytes
.../perl-Proc-Background-1.10-1.el6.noarch.rpm | Bin 0 -> 25128 bytes
.../RPMS/perl-Sub-Exporter-0.987-1.el6.noarch.rpm | Bin 0 -> 54936 bytes
...-Exporter-Progressive-0.001011-1.el6.noarch.rpm | Bin 0 -> 8976 bytes
.../RPMS/perl-Sub-Install-0.928-1.el6.noarch.rpm | Bin 0 -> 17236 bytes
.../RPMS/perl-TermReadKey-2.32-1.el6.x86_64.rpm | Bin 0 -> 30880 bytes
...erl-TermReadKey-debuginfo-2.32-1.el6.x86_64.rpm | Bin 0 -> 48532 bytes
.../RPMS/perl-Test-Output-1.03-1.el6.noarch.rpm | Bin 0 -> 14272 bytes
...perl-XML-NamespaceSupport-1.11-1.el6.noarch.rpm | Bin 0 -> 14592 bytes
Scanner/RPMS/perl-XML-SAX-0.99-1.el6.noarch.rpm | Bin 0 -> 52952 bytes
.../RPMS/perl-XML-SAX-Base-1.08-1.el6.noarch.rpm | Bin 0 -> 29288 bytes
.../RPMS/perl-XML-SAX-Expat-0.51-1.el6.noarch.rpm | Bin 0 -> 11148 bytes
Scanner/RPMS/perl-XML-Simple-2.20-1.el6.noarch.rpm | Bin 0 -> 76704 bytes
Scanner/SQL/01_create_node.sql | 119 +
Scanner/SQL/02_create_alerts.sql | 162 +
Scanner/SQL/03_create_alert_listeners.sql | 97 +
Scanner/SQL/04_load_alert_listeners.sql | 56 +
Scanner/SQL/05_create_random_agent.sql | 148 +
Scanner/SQL/06_create_snm_apc_ups.sql | 152 +
Scanner/SQL/07_create_ipmi.sql | 152 +
Scanner/SQL/08_create_raid.sql | 152 +
Scanner/Src/Makefile | 37 +
Scanner/Src/README | 26 +
Scanner/Src/wipmi.c | 14 +
Scanner/Src/wstorcli.c | 89 +
Scanner/lib/AN/Agent.pm | 327 +
Scanner/lib/AN/Alerts.pm | 525 +
Scanner/lib/AN/Cluster.pm |10790 +++
Scanner/lib/AN/Common.pm | 1640 +
Scanner/lib/AN/DBS.pm | 296 +
Scanner/lib/AN/Email.pm | 221 +
Scanner/lib/AN/FlagFile.pm | 487 +
Scanner/lib/AN/HealthMonitor.pm | 224 +
Scanner/lib/AN/IPMI/Temp.pm | 202 +
Scanner/lib/AN/InstallManifest.pm | 3348 +
Scanner/lib/AN/Listener.pm | 217 +
Scanner/lib/AN/MonitorAgent.pm | 313 +
Scanner/lib/AN/Msg_xlator.pm | 254 +
Scanner/lib/AN/OneAlert.pm | 226 +
Scanner/lib/AN/OneDB.pm | 509 +
Scanner/lib/AN/RAID/Temp.pm | 343 +
Scanner/lib/AN/SNMP/APC_UPS.pm | 686 +
Scanner/lib/AN/Scanner.pm | 923 +
Scanner/lib/AN/Screen.pm | 164 +
Scanner/lib/AN/Striker.pm |12081 ++++
Scanner/lib/AN/Unix.pm | 225 +
Scanner/scanner | 306 +
Scanner/t/10-an-agent.t | 265 +
Scanner/t/15-an-onealert.t | 122 +
Scanner/t/20-an-onedb.t | 262 +
Scanner/t/25-an-screen.t | 60 +
Scanner/t/30-an-email.t | 60 +
Scanner/t/35-an-msg_xlator.t | 194 +
Scanner/t/40-an-flagfile.t | 240 +
Scanner/t/45-an-listener.t | 93 +
Scanner/t/50-an-monitoragent.t | 45 +
Scanner/t/55-an-dbs.t | 283 +
Scanner/t/60-an-unix.t | 71 +
Scanner/t/65-an-alerts.t | 385 +
Scanner/t/70-an-snmp-apc_ups.t | 1117 +
Scanner/t/75-an-ipmi-temp.t | 171 +
Scanner/t/test_coverage | 11 +
102 files changed, 112285 insertions(+), 0 deletions(-)
create mode 100644 .gitignore
create mode 100755 Scanner/Agents/ipmi
create mode 100755 Scanner/Agents/raid
create mode 100755 Scanner/Agents/random-agent
create mode 100755 Scanner/Agents/snmp_apc_ups
create mode 100755 Scanner/Bin/clean
create mode 100755 Scanner/Bin/db
create mode 100755 Scanner/Bin/dbclean
create mode 100755 Scanner/Bin/dbclean_cmds
create mode 100644 Scanner/Config/db.conf
create mode 100644 Scanner/Config/ipmi.conf
create mode 100644 Scanner/Config/raid.conf
create mode 100644 Scanner/Config/scanner.conf
create mode 100644 Scanner/Config/snmp_apc_ups.conf
create mode 100644 Scanner/Docs/Writing_an_agent_by_extending_existing_perl_classes.
create mode 100644 Scanner/MIB/powernet412.mib.txt
create mode 100644 Scanner/Makefile
create mode 100644 Scanner/Messages/ipmi.xml
create mode 100644 Scanner/Messages/raid.xml
create mode 100644 Scanner/Messages/random-agent.xml
create mode 100644 Scanner/Messages/scanner.xml
create mode 100644 Scanner/Messages/snmp_apc_ups.xml
create mode 100755 Scanner/RPMS/load_rpm_packages.sh
create mode 100644 Scanner/RPMS/perl-Capture-Tiny-0.27-1.el6.noarch.rpm
create mode 100644 Scanner/RPMS/perl-Class-Tiny-1.000-1.rhel6.noarch.rpm
create mode 100644 Scanner/RPMS/perl-Clone-0.37-1.el6.x86_64.rpm
create mode 100644 Scanner/RPMS/perl-Clone-debuginfo-0.37-1.el6.x86_64.rpm
create mode 100644 Scanner/RPMS/perl-Const-Fast-0.006-1.el6.noarch.rpm
create mode 100644 Scanner/RPMS/perl-Crypt-CBC-2.33-1.el6.noarch.rpm
create mode 100644 Scanner/RPMS/perl-Crypt-DES-2.07-1.el6.x86_64.rpm
create mode 100644 Scanner/RPMS/perl-Crypt-DES-debuginfo-2.07-1.el6.x86_64.rpm
create mode 100644 Scanner/RPMS/perl-Data-OptList-0.109-1.el6.noarch.rpm
create mode 100644 Scanner/RPMS/perl-Devel-GlobalDestruction-0.13-1.el6.noarch.rpm
create mode 100644 Scanner/RPMS/perl-Devel-GlobalDestruction-XS-0.01-1.el6.x86_64.rpm
create mode 100644 Scanner/RPMS/perl-Devel-GlobalDestruction-XS-debuginfo-0.01-1.el6.x86_64.rpm
create mode 100644 Scanner/RPMS/perl-Exporter-Tiny-0.042-1.el6.noarch.rpm
create mode 100644 Scanner/RPMS/perl-Net-SNMP-v6.0.1-1.el6.noarch.rpm
create mode 100644 Scanner/RPMS/perl-Net-SSH2-0.53-1.el6.x86_64.rpm
create mode 100644 Scanner/RPMS/perl-Net-SSH2-debuginfo-0.53-1.el6.x86_64.rpm
create mode 100644 Scanner/RPMS/perl-Params-Util-1.07-1.el6.x86_64.rpm
create mode 100644 Scanner/RPMS/perl-Params-Util-debuginfo-1.07-1.el6.x86_64.rpm
create mode 100644 Scanner/RPMS/perl-Proc-Background-1.10-1.el6.noarch.rpm
create mode 100644 Scanner/RPMS/perl-Sub-Exporter-0.987-1.el6.noarch.rpm
create mode 100644 Scanner/RPMS/perl-Sub-Exporter-Progressive-0.001011-1.el6.noarch.rpm
create mode 100644 Scanner/RPMS/perl-Sub-Install-0.928-1.el6.noarch.rpm
create mode 100644 Scanner/RPMS/perl-TermReadKey-2.32-1.el6.x86_64.rpm
create mode 100644 Scanner/RPMS/perl-TermReadKey-debuginfo-2.32-1.el6.x86_64.rpm
create mode 100644 Scanner/RPMS/perl-Test-Output-1.03-1.el6.noarch.rpm
create mode 100644 Scanner/RPMS/perl-XML-NamespaceSupport-1.11-1.el6.noarch.rpm
create mode 100644 Scanner/RPMS/perl-XML-SAX-0.99-1.el6.noarch.rpm
create mode 100644 Scanner/RPMS/perl-XML-SAX-Base-1.08-1.el6.noarch.rpm
create mode 100644 Scanner/RPMS/perl-XML-SAX-Expat-0.51-1.el6.noarch.rpm
create mode 100644 Scanner/RPMS/perl-XML-Simple-2.20-1.el6.noarch.rpm
create mode 100644 Scanner/SQL/01_create_node.sql
create mode 100644 Scanner/SQL/02_create_alerts.sql
create mode 100644 Scanner/SQL/03_create_alert_listeners.sql
create mode 100644 Scanner/SQL/04_load_alert_listeners.sql
create mode 100644 Scanner/SQL/05_create_random_agent.sql
create mode 100644 Scanner/SQL/06_create_snm_apc_ups.sql
create mode 100644 Scanner/SQL/07_create_ipmi.sql
create mode 100644 Scanner/SQL/08_create_raid.sql
create mode 100644 Scanner/Src/Makefile
create mode 100644 Scanner/Src/README
create mode 100644 Scanner/Src/wipmi.c
create mode 100644 Scanner/Src/wstorcli.c
create mode 100644 Scanner/lib/AN/Agent.pm
create mode 100644 Scanner/lib/AN/Alerts.pm
create mode 100644 Scanner/lib/AN/Cluster.pm
create mode 100644 Scanner/lib/AN/Common.pm
create mode 100644 Scanner/lib/AN/DBS.pm
create mode 100644 Scanner/lib/AN/Email.pm
create mode 100644 Scanner/lib/AN/FlagFile.pm
create mode 100644 Scanner/lib/AN/HealthMonitor.pm
create mode 100644 Scanner/lib/AN/IPMI/Temp.pm
create mode 100755 Scanner/lib/AN/InstallManifest.pm
create mode 100644 Scanner/lib/AN/Listener.pm
create mode 100644 Scanner/lib/AN/MonitorAgent.pm
create mode 100644 Scanner/lib/AN/Msg_xlator.pm
create mode 100644 Scanner/lib/AN/OneAlert.pm
create mode 100644 Scanner/lib/AN/OneDB.pm
create mode 100644 Scanner/lib/AN/RAID/Temp.pm
create mode 100644 Scanner/lib/AN/SNMP/APC_UPS.pm
create mode 100644 Scanner/lib/AN/Scanner.pm
create mode 100644 Scanner/lib/AN/Screen.pm
create mode 100644 Scanner/lib/AN/Striker.pm
create mode 100644 Scanner/lib/AN/Unix.pm
create mode 100755 Scanner/scanner
create mode 100644 Scanner/t/10-an-agent.t
create mode 100644 Scanner/t/15-an-onealert.t
create mode 100644 Scanner/t/20-an-onedb.t
create mode 100644 Scanner/t/25-an-screen.t
create mode 100644 Scanner/t/30-an-email.t
create mode 100644 Scanner/t/35-an-msg_xlator.t
create mode 100644 Scanner/t/40-an-flagfile.t
create mode 100644 Scanner/t/45-an-listener.t
create mode 100644 Scanner/t/50-an-monitoragent.t
create mode 100644 Scanner/t/55-an-dbs.t
create mode 100644 Scanner/t/60-an-unix.t
create mode 100644 Scanner/t/65-an-alerts.t
create mode 100644 Scanner/t/70-an-snmp-apc_ups.t
create mode 100644 Scanner/t/75-an-ipmi-temp.t
create mode 100755 Scanner/t/test_coverage
ls -lah
total 180K
drwxr-xr-x. 9 root root 4.0K Jan 16 16:35 .
dr-xr-x---. 14 root root 4.0K Jan 16 16:32 ..
-rwxr-xr-x. 1 root root 122K Jan 16 16:33 anvil_setup
drwxr-xr-x. 4 root root 4.0K Jan 16 16:33 cgi-bin
-rw-r--r--. 1 root root 7.4K Jan 16 16:33 CHANGELOG
drwxr-xr-x. 8 root root 4.0K Jan 16 16:35 .git
-rw-r--r--. 1 root root 279 Jan 16 16:35 .gitignore
drwxr-xr-x. 2 root root 4.0K Jan 16 16:33 guacamole
drwxr-xr-x. 3 root root 4.0K Jan 16 16:33 html
-rw-r--r--. 1 root root 3.4K Jan 16 16:33 README.md
drwxr-xr-x. 13 root root 4.0K Jan 16 16:35 Scanner
-rw-r--r--. 1 root root 3.7K Jan 16 16:33 striker.conf
drwxr-xr-x. 2 root root 4.0K Jan 16 16:33 t
drwxr-xr-x. 2 root root 4.0K Jan 16 16:33 tools
cd Scanner/Config/
vim db.conf
git diff db.conf
diff --git a/Scanner/Config/db.conf b/Scanner/Config/db.conf
index 9925faf..e39aa60 100644
--- a/Scanner/Config/db.conf
+++ b/Scanner/Config/db.conf
@@ -1,7 +1,6 @@
db::1::name = scanner
db::1::db_type = Pg
-db::1::host = 10.255.4.251
-#db::1::host = an-m01
+db::1::host = 10.20.4.2
db::1::port = 5432
-db::1::user = alteeve
-db::1::password = alteeve
+db::1::user = striker
+db::1::password = secret
cd ../RPMS
./load_rpm_packages.sh
# say 'y' when prompted
cd ..
make wrapper
cd Src && make
make[1]: Entering directory `/root/striker/Scanner/Src'
if [[ "root" != "root" ]] ; then \
echo "Only root can create wrappers."; \
echo "run as: sudo make"; \
else \
cc -o wipmi wipmi.c; \
cp wipmi ..; \
chown root:root ../wipmi; \
chmod 755 ../wipmi; \
chmod u+s ../wipmi; \
fi
if [[ "root" != "root" ]] ; then \
echo "Only root can create wrappers."; \
echo "run as: sudo make"; \
else \
cc -o wstorcli wipmi.c; \
cp wstorcli ..; \
chown root:root ../wstorcli; \
chmod 755 ../wstorcli; \
chmod u+s ../wstorcli; \
fi
make[1]: Leaving directory `/root/striker/Scanner/Src'
Test:
Agents/ipmi --verbose --verbose
ipmi loop 1 at 1421444884.53996 2378.437:27621.563 mSec.
^C
Yay!
| Any questions, feedback, advice, complaints or meanderings are welcome. | |||
| Alteeve's Niche! | Alteeve Enterprise Support | Community Support | |
| © 2025 Alteeve. Intelligent Availability® is a registered trademark of Alteeve's Niche! Inc. 1997-2025 | |||
| legal stuff: All info is provided "As-Is". Do not use anything here unless you are willing and able to take responsibility for your own actions. | |||