Building a Node Assassin v1.2.1: Difference between revisions

From Alteeve Wiki
Jump to navigation Jump to search
No edit summary
Line 23: Line 23:


You can download all of the build images as a single file:
You can download all of the build images as a single file:
* [http://nodeassassin.org/files/node_assassin/node_assassin-1.1.6.tar.gz node_assassin-1.1.6.tar.gz] (121 [[MiB]]).
 
** This file contains the original images (1980 pixels wide) as well as resized versions at 1440, 1280, 1024 and 800 pixels wide for use on various screen sizes.
* Build images (by image width):
** [http://nodeassassin.org/files/node_assassin/Node_Assassin_v1.2.1_1980.tar.bz2 Node_Assassin_v1.2.1_1980.tar.bz2] - 1980px wide (original) (14 [[MiB]]).
** [http://nodeassassin.org/files/node_assassin/Node_Assassin_v1.2.1_1440.tar.bz2 Node_Assassin_v1.2.1_1440.tar.bz2] - 1440px wide (38 [[MiB]]).
** [http://nodeassassin.org/files/node_assassin/Node_Assassin_v1.2.1_1280.tar.bz2 Node_Assassin_v1.2.1_1280.tar.bz2] - 1280px wide (33 [[MiB]]).
** [http://nodeassassin.org/files/node_assassin/Node_Assassin_v1.2.1_1024.tar.bz2 Node_Assassin_v1.2.1_1024.tar.bz2] - 1024px wide (24 [[MiB]]).
** [http://nodeassassin.org/files/node_assassin/Node_Assassin_v1.2.1_800.tar.bz2 Node_Assassin_v1.2.1_800.tar.bz2] - 800px wide (15 [[MiB]]).
 
Note that the smaller sizes are larger files as they were converted by a script rather than a graphics program and thus were saved somewhat less efficiently.


The following table is best viewed on a wide screen display at high resolution.
The following table is best viewed on a wide screen display at high resolution.

Revision as of 14:42, 8 February 2011

 Node Assassin :: Node_Assassin v1.1.4 :: Building a Node Assassin v1.2.1

blah

ToDo

Agent

Add a "wait" option so that a delay can be used to prevent simultaneous fencing. Like a greylist.

Circuit Diagram

This is the BSchV3 generated circuit diagram for the v1.2.1 Node Assassin.

Circuit diagram for the eight-port Node Assassin v1.2.1.

Take 10k resistor on node sense in, other site to +5. Node in is ground. Cable in pulls in the low.

Individual Build Images

You can download all of the build images as a single file:

Note that the smaller sizes are larger files as they were converted by a script rather than a graphics program and thus were saved somewhat less efficiently.

The following table is best viewed on a wide screen display at high resolution.

Top View

Individual Build Images - Top View
Node Assassin v1.2.1 - Lab-Easy PADS-8 Prep
Node Assassin v1.2.1 - Parts placement
Node Assassin v1.2.1 - Power lines from Arduino
Node Assassin v1.2.1 - Ground lines from Arduino
Node Assassin v1.2.1 - Isolated ground lines from each node
Node Assassin v1.2.1 - Node power switch feeds
Node Assassin v1.2.1 - Node reset switch feeds
Node Assassin v1.2.1 - Node power sense feeds
Node Assassin v1.2.1 - Cable sense circuit return line
Node Assassin v1.2.1 - Node power singal opto's to buffer and on to Arduino inputs
Node Assassin v1.2.1 - Buffer to inverters
Node Assassin v1.2.1 - Arduino output to opto anodes
Node Assassin v1.2.1 - Opto anodes to quad ORs
Node Assassin v1.2.1 - Quad OR outputs to inverters
Node Assassin v1.2.1 - Quad OR output to "Fenced" LEDs
Node Assassin v1.2.1 - Inverters to "Fence OK" LEDs
Node Assassin v1.2.1 - Inverters to "Node Off" LEDs
Node Assassin v1.2.1 - Buffer to "Node On" LEDs

Bottom View

Individual Build Images - Bottom View
Node Assassin v1.2.1 - Lab-Easy PADS-8 Prep
Node Assassin v1.2.1 - Parts placement
Node Assassin v1.2.1 - Power lines from Arduino
Node Assassin v1.2.1 - Ground lines from Arduino
Node Assassin v1.2.1 - Isolated ground lines from each node
Node Assassin v1.2.1 - Node power switch feeds
Node Assassin v1.2.1 - Node reset switch feeds
Node Assassin v1.2.1 - Node power sense feeds
Node Assassin v1.2.1 - Cable sense circuit return line
Node Assassin v1.2.1 - Node power singal opto's to buffer and on to Arduino inputs
Node Assassin v1.2.1 - Buffer to inverters
Node Assassin v1.2.1 - Arduino output to opto anodes
Node Assassin v1.2.1 - Opto anodes to quad ORs
Node Assassin v1.2.1 - Quad OR outputs to inverters
Node Assassin v1.2.1 - Quad OR output to "Fenced" LEDs
Node Assassin v1.2.1 - Inverters to "Fence OK" LEDs
Node Assassin v1.2.1 - Inverters to "Node Off" LEDs
Node Assassin v1.2.1 - Buffer to "Node On" LEDs

 

Input, advice, complaints and meanderings all welcome!
Digimer digimer@alteeve.ca https://alteeve.ca/w legal stuff:  
All info is provided "As-Is". Do not use anything here unless you are willing and able to take resposibility for your own actions. © 1997-2013
Naming credits go to Christopher Olah!
In memory of Kettle, Tonia, Josh, Leah and Harvey. In special memory of Hannah, Jack and Riley.