Building a Node Assassin v1.2.1: Difference between revisions

From Alteeve Wiki
Jump to navigation Jump to search
No edit summary
 
(6 intermediate revisions by the same user not shown)
Line 2: Line 2:


blah
blah
= ToDo =
== Agent ==
Add a "wait" option so that a delay can be used to prevent simultaneous fencing. Like a greylist.


== Circuit Diagram ==
== Circuit Diagram ==


This is the BSchV3 generated circuit diagram for the '''v1.2.0''' Node Assassin.
This is the BSchV3 generated circuit diagram for the '''v1.2.1''' Node Assassin.


{|
{|
|-
|-
|[[Image:na_v1.2.0_circuit_diagram.png|thumb|820px|left|Circuit diagram for the eight-port Node Assassin v1.2.0.]]
|[[Image:na_v1.2.1_circuit_diagram.png|thumb|820px|left|Circuit diagram for the eight-port Node Assassin v1.2.1.]]
|}
|}


== Individual Build Images ==
Take 10k resistor on node sense in, other site to +5. Node in is ground. Cable in pulls in the low.
 
You can download all of the build images as a single file:
* [http://nodeassassin.org/files/node_assassin/node_assassin-1.1.6.tar.gz node_assassin-1.1.6.tar.gz] (121 [[MiB]]).
** This file contains the original images (1980 pixels wide) as well as resized versions at 1440, 1280, 1024 and 800 pixels wide for use on various screen sizes.
 
The following table is best viewed on a wide screen display at high resolution.


=== Top View ===
=== Top View ===
Line 26: Line 26:
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center; font-weight: bold;" colspan="2"|''Individual Build Images - Top View''
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center; font-weight: bold;" colspan="2"|''Individual Build Images - Top View''
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_01-Board_Prep.png|center|thumb|1024px|Node Assassin v1.2.0 - Lab-Easy PADS-8 Prep]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_01-Board_Prep.png|center|thumb|1024px|Node Assassin v1.2.1 - Lab-Easy PADS-8 Prep]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_02-Part_Placement.png|center|thumb|1024px|Node Assassin v1.2.0 - Parts placement]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_02-Part_Placement.png|center|thumb|1024px|Node Assassin v1.2.1 - Parts placement]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_03-Power_Lines.png|center|thumb|1024px|Node Assassin v1.2.0 - Power lines from Arduino]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_03-Power_Lines.png|center|thumb|1024px|Node Assassin v1.2.1 - Power lines from Arduino]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_04-Ground_Lines.png|center|thumb|1024px|Node Assassin v1.2.0 - Ground lines from Arduino]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_04-Ground_Lines.png|center|thumb|1024px|Node Assassin v1.2.1 - Ground lines from Arduino]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_05-Node_Grounds.png|center|thumb|1024px|Node Assassin v1.2.0 - Isolated ground lines from each node]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_05-Node_Grounds.png|center|thumb|1024px|Node Assassin v1.2.1 - Isolated ground lines from each node]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_06-Node_Power_Feeds.png|center|thumb|1024px|Node Assassin v1.2.0 - Node power switch feeds]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_06-Node_Power_Feeds.png|center|thumb|1024px|Node Assassin v1.2.1 - Node power switch feeds]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_07-Node_Reset_Lines.png|center|thumb|1024px|Node Assassin v1.2.0 - Node reset switch feeds]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_07-Node_Reset_Lines.png|center|thumb|1024px|Node Assassin v1.2.1 - Node reset switch feeds]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_08-Node_Power_Lines.png|center|thumb|1024px|Node Assassin v1.2.0 - Node power sense feeds]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_08-Node_Power_Lines.png|center|thumb|1024px|Node Assassin v1.2.1 - Node power sense feeds]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_09-Cable_Detect_In.png|center|thumb|1024px|Node Assassin v1.2.0 - Cable sense circuit return line]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_09-Cable_Detect_In.png|center|thumb|1024px|Node Assassin v1.2.1 - Cable sense circuit return line]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_10-Node_Feed_Opto_Via_Buffer_To_Input.png|center|thumb|1024px|Node Assassin v1.2.0 - Node power singal opto's to buffer and on to Arduino inputs]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_10-Node_Feed_Opto_Via_Buffer_To_Input.png|center|thumb|1024px|Node Assassin v1.2.1 - Node power singal opto's to buffer and on to Arduino inputs]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_11-Buffer_To_Inverters.png|center|thumb|1024px|Node Assassin v1.2.0 - Buffer to inverters]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_11-Buffer_To_Inverters.png|center|thumb|1024px|Node Assassin v1.2.1 - Buffer to inverters]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_12-Output_To_Opto_Anode.png|center|thumb|1024px|Node Assassin v1.2.0 - Arduino output to opto anodes]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_12-Output_To_Opto_Anode.png|center|thumb|1024px|Node Assassin v1.2.1 - Arduino output to opto anodes]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_13-Opto_Anode_To_OR.png|center|thumb|1024px|Node Assassin v1.2.0 - Opto anodes to quad ORs]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_13-Opto_Anode_To_OR.png|center|thumb|1024px|Node Assassin v1.2.1 - Opto anodes to quad ORs]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_14-OR_To_Inverter.png|center|thumb|1024px|Node Assassin v1.2.0 - Quad OR outputs to inverters]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_14-OR_To_Inverter.png|center|thumb|1024px|Node Assassin v1.2.1 - Quad OR outputs to inverters]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_15-OR_To_Fenced_LED.png|center|thumb|1024px|Node Assassin v1.2.0 - Quad OR output to "Fenced" LEDs]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_15-OR_To_Fenced_LED.png|center|thumb|1024px|Node Assassin v1.2.1 - Quad OR output to "Fenced" LEDs]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_16-Inverter_To_Fence_OK_LED.png|center|thumb|1024px|Node Assassin v1.2.0 - Inverters to "Fence OK" LEDs]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_16-Inverter_To_Fence_OK_LED.png|center|thumb|1024px|Node Assassin v1.2.1 - Inverters to "Fence OK" LEDs]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_17-Inverter_To_Node_Off_LED.png|center|thumb|1024px|Node Assassin v1.2.0 - Inverters to "Node Off" LEDs]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_17-Inverter_To_Node_Off_LED.png|center|thumb|1024px|Node Assassin v1.2.1 - Inverters to "Node Off" LEDs]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_18-Buffer_To_Node_On_LED.png|center|thumb|1024px|Node Assassin v1.2.0 - Buffer to "Node On" LEDs]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_18-Buffer_To_Node_On_LED.png|center|thumb|1024px|Node Assassin v1.2.1 - Buffer to "Node On" LEDs]]
|}
|}


Line 69: Line 69:
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center; font-weight: bold;" colspan="2"|''Individual Build Images - Bottom View''
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center; font-weight: bold;" colspan="2"|''Individual Build Images - Bottom View''
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_01-Board_Prep.png|center|thumb|1024px|Node Assassin v1.2.0 - Lab-Easy PADS-8 Prep]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_01-Board_Prep.png|center|thumb|1024px|Node Assassin v1.2.1 - Lab-Easy PADS-8 Prep]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_02-Part_Placement.png|center|thumb|1024px|Node Assassin v1.2.0 - Parts placement]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_02-Part_Placement.png|center|thumb|1024px|Node Assassin v1.2.1 - Parts placement]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_03-Power_Lines.png|center|thumb|1024px|Node Assassin v1.2.0 - Power lines from Arduino]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_03-Power_Lines.png|center|thumb|1024px|Node Assassin v1.2.1 - Power lines from Arduino]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_04-Ground_Lines.png|center|thumb|1024px|Node Assassin v1.2.0 - Ground lines from Arduino]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_04-Ground_Lines.png|center|thumb|1024px|Node Assassin v1.2.1 - Ground lines from Arduino]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_05-Node_Grounds.png|center|thumb|1024px|Node Assassin v1.2.0 - Isolated ground lines from each node]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_05-Node_Grounds.png|center|thumb|1024px|Node Assassin v1.2.1 - Isolated ground lines from each node]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_06-Node_Power_Feeds.png|center|thumb|1024px|Node Assassin v1.2.0 - Node power switch feeds]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_06-Node_Power_Feeds.png|center|thumb|1024px|Node Assassin v1.2.1 - Node power switch feeds]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_07-Node_Reset_Lines.png|center|thumb|1024px|Node Assassin v1.2.0 - Node reset switch feeds]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_07-Node_Reset_Lines.png|center|thumb|1024px|Node Assassin v1.2.1 - Node reset switch feeds]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_08-Node_Power_Lines.png|center|thumb|1024px|Node Assassin v1.2.0 - Node power sense feeds]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_08-Node_Power_Lines.png|center|thumb|1024px|Node Assassin v1.2.1 - Node power sense feeds]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_09-Cable_Detect_In.png|center|thumb|1024px|Node Assassin v1.2.0 - Cable sense circuit return line]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_09-Cable_Detect_In.png|center|thumb|1024px|Node Assassin v1.2.1 - Cable sense circuit return line]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_10-Node_Feed_Opto_Via_Buffer_To_Input.png|center|thumb|1024px|Node Assassin v1.2.0 - Node power singal opto's to buffer and on to Arduino inputs]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_10-Node_Feed_Opto_Via_Buffer_To_Input.png|center|thumb|1024px|Node Assassin v1.2.1 - Node power singal opto's to buffer and on to Arduino inputs]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_11-Buffer_To_Inverters.png|center|thumb|1024px|Node Assassin v1.2.0 - Buffer to inverters]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_11-Buffer_To_Inverters.png|center|thumb|1024px|Node Assassin v1.2.1 - Buffer to inverters]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_12-Output_To_Opto_Anode.png|center|thumb|1024px|Node Assassin v1.2.0 - Arduino output to opto anodes]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_12-Output_To_Opto_Anode.png|center|thumb|1024px|Node Assassin v1.2.1 - Arduino output to opto anodes]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_13-Opto_Anode_To_OR.png|center|thumb|1024px|Node Assassin v1.2.0 - Opto anodes to quad ORs]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_13-Opto_Anode_To_OR.png|center|thumb|1024px|Node Assassin v1.2.1 - Opto anodes to quad ORs]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_14-OR_To_Inverter.png|center|thumb|1024px|Node Assassin v1.2.0 - Quad OR outputs to inverters]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_14-OR_To_Inverter.png|center|thumb|1024px|Node Assassin v1.2.1 - Quad OR outputs to inverters]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_15-OR_To_Fenced_LED.png|center|thumb|1024px|Node Assassin v1.2.0 - Quad OR output to "Fenced" LEDs]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_15-OR_To_Fenced_LED.png|center|thumb|1024px|Node Assassin v1.2.1 - Quad OR output to "Fenced" LEDs]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_16-Inverter_To_Fence_OK_LED.png|center|thumb|1024px|Node Assassin v1.2.0 - Inverters to "Fence OK" LEDs]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_16-Inverter_To_Fence_OK_LED.png|center|thumb|1024px|Node Assassin v1.2.1 - Inverters to "Fence OK" LEDs]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_17-Inverter_To_Node_Off_LED.png|center|thumb|1024px|Node Assassin v1.2.0 - Inverters to "Node Off" LEDs]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_17-Inverter_To_Node_Off_LED.png|center|thumb|1024px|Node Assassin v1.2.1 - Inverters to "Node Off" LEDs]]
|-
|-
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.0_inverted_18-Buffer_To_Node_On_LED.png|center|thumb|1024px|Node Assassin v1.2.0 - Buffer to "Node On" LEDs]]
|style="border-bottom: 1px dotted #7f7f7f; border-right: 1px dotted #7f7f7f; text-align: center;"|[[Image:Node_Assassin_v1.2.1_inverted_18-Buffer_To_Node_On_LED.png|center|thumb|1024px|Node Assassin v1.2.1 - Buffer to "Node On" LEDs]]
|}
|}


{{na_footer}}
{{na_footer}}

Latest revision as of 04:31, 13 June 2011

 Node Assassin :: Node_Assassin v1.1.4 :: Building a Node Assassin v1.2.1

blah

ToDo

Agent

Add a "wait" option so that a delay can be used to prevent simultaneous fencing. Like a greylist.

Circuit Diagram

This is the BSchV3 generated circuit diagram for the v1.2.1 Node Assassin.

Circuit diagram for the eight-port Node Assassin v1.2.1.

Take 10k resistor on node sense in, other site to +5. Node in is ground. Cable in pulls in the low.

Top View

Individual Build Images - Top View
Node Assassin v1.2.1 - Lab-Easy PADS-8 Prep
Node Assassin v1.2.1 - Parts placement
Node Assassin v1.2.1 - Power lines from Arduino
Node Assassin v1.2.1 - Ground lines from Arduino
Node Assassin v1.2.1 - Isolated ground lines from each node
Node Assassin v1.2.1 - Node power switch feeds
Node Assassin v1.2.1 - Node reset switch feeds
Node Assassin v1.2.1 - Node power sense feeds
Node Assassin v1.2.1 - Cable sense circuit return line
Node Assassin v1.2.1 - Node power singal opto's to buffer and on to Arduino inputs
Node Assassin v1.2.1 - Buffer to inverters
Node Assassin v1.2.1 - Arduino output to opto anodes
Node Assassin v1.2.1 - Opto anodes to quad ORs
Node Assassin v1.2.1 - Quad OR outputs to inverters
Node Assassin v1.2.1 - Quad OR output to "Fenced" LEDs
Node Assassin v1.2.1 - Inverters to "Fence OK" LEDs
Node Assassin v1.2.1 - Inverters to "Node Off" LEDs
Node Assassin v1.2.1 - Buffer to "Node On" LEDs

Bottom View

Individual Build Images - Bottom View
Node Assassin v1.2.1 - Lab-Easy PADS-8 Prep
Node Assassin v1.2.1 - Parts placement
Node Assassin v1.2.1 - Power lines from Arduino
Node Assassin v1.2.1 - Ground lines from Arduino
Node Assassin v1.2.1 - Isolated ground lines from each node
Node Assassin v1.2.1 - Node power switch feeds
Node Assassin v1.2.1 - Node reset switch feeds
Node Assassin v1.2.1 - Node power sense feeds
Node Assassin v1.2.1 - Cable sense circuit return line
Node Assassin v1.2.1 - Node power singal opto's to buffer and on to Arduino inputs
Node Assassin v1.2.1 - Buffer to inverters
Node Assassin v1.2.1 - Arduino output to opto anodes
Node Assassin v1.2.1 - Opto anodes to quad ORs
Node Assassin v1.2.1 - Quad OR outputs to inverters
Node Assassin v1.2.1 - Quad OR output to "Fenced" LEDs
Node Assassin v1.2.1 - Inverters to "Fence OK" LEDs
Node Assassin v1.2.1 - Inverters to "Node Off" LEDs
Node Assassin v1.2.1 - Buffer to "Node On" LEDs

 

Input, advice, complaints and meanderings all welcome!
Digimer digimer@alteeve.ca https://alteeve.ca/w legal stuff:  
All info is provided "As-Is". Do not use anything here unless you are willing and able to take resposibility for your own actions. © 1997-2013
Naming credits go to Christopher Olah!
In memory of Kettle, Tonia, Josh, Leah and Harvey. In special memory of Hannah, Jack and Riley.