Configuring APC SmartUPS with AP9630 Network Cards: Difference between revisions
Jump to navigation
Jump to search
(Created page with "{{header}} {{note|1=Depending on the firmware version, your screenshots may use the old APC branding and will differ significantly from the screenshots we use. An upgrade of ...") |
No edit summary |
||
Line 3: | Line 3: | ||
{{note|1=Depending on the firmware version, your screenshots may use the old APC branding and will differ significantly from the screenshots we use. An upgrade of the firmware should update your web interface.}} | {{note|1=Depending on the firmware version, your screenshots may use the old APC branding and will differ significantly from the screenshots we use. An upgrade of the firmware should update your web interface.}} | ||
This tutorial assumes a fresh configuration. If you've changed anything, you should reset your UPS to factory defaults. | |||
= Resetting To Factory Defaults = | |||
{{note|1=You will need a [[serial port]] to connect to the UPS network controller. If your computer doesn't have a serial port, the [[Selecting_Hardware_For_Your_Anvil!#Serial_Access|Antaria]] line of USB to serial adapters work perfectly in Linux and other operating systems. For this tutorial, we will be using the <span class="code">screen</span> program to access the serial interface. In our case, the serial port is <span class="code">/dev/ttyUSB0</span>. This might well be different for you, depending on your operating system, serial port hardware, etc.}} | |||
<syntaxhighlight lang="bash"> | |||
screen /dev/ttyUSB0 | |||
</syntaxhighlight> | |||
The initial page will show nothing, so press <span class="code"><enter></span> a couple of times until the login prompt appears. | |||
<syntaxhighlight lang="text"> | |||
User Name : | |||
</syntaxhighlight> | |||
Enter '<span class="code">apc</span>'. If the UPS has not been configured before, the default password is also '<span class="code">apc</span>'. If someone has changed the password, you will need to use that. | |||
{{note|1=If you don't know what the current password is, use the [http://www.apc.com/us/en/faqs/FA156075/ password reset] procedure.}} | |||
<syntaxhighlight lang="text"> | |||
User Name : apc | |||
Password : ****** | |||
</syntaxhighlight> | |||
When you login, you will see the default menu. | |||
<syntaxhighlight lang="text"> | |||
American Power Conversion Network Management Card AOS v6.2.1 | |||
(c) Copyright 2015 All Rights Reserved Smart-UPS & Matrix-UPS APP v6.2.1 | |||
------------------------------------------------------------------------------- | |||
Name : apcF18EB3 Date : 11/14/2016 | |||
Contact : Unknown Time : 08:34:31 | |||
Location : Unknown User : Super User | |||
Up Time : 19 Days 20 Hours 38 Minutes Stat : P+ N4+ N6+ A+ | |||
Type ? for command listing | |||
Use tcpip command for IP address(-i), subnet(-s), and gateway(-g) | |||
apc> | |||
</syntaxhighlight> | |||
<span class="code"></span> | |||
<syntaxhighlight lang="bash"> | |||
</syntaxhighlight> | |||
<syntaxhighlight lang="text"> | |||
</syntaxhighlight> | |||
{{footer}} | {{footer}} |
Revision as of 21:03, 14 November 2016
AN!Wiki :: Configuring APC SmartUPS with AP9630 Network Cards |
Note: Depending on the firmware version, your screenshots may use the old APC branding and will differ significantly from the screenshots we use. An upgrade of the firmware should update your web interface. |
This tutorial assumes a fresh configuration. If you've changed anything, you should reset your UPS to factory defaults.
Resetting To Factory Defaults
Note: You will need a serial port to connect to the UPS network controller. If your computer doesn't have a serial port, the Antaria line of USB to serial adapters work perfectly in Linux and other operating systems. For this tutorial, we will be using the screen program to access the serial interface. In our case, the serial port is /dev/ttyUSB0. This might well be different for you, depending on your operating system, serial port hardware, etc. |
screen /dev/ttyUSB0
The initial page will show nothing, so press <enter> a couple of times until the login prompt appears.
User Name :
Enter 'apc'. If the UPS has not been configured before, the default password is also 'apc'. If someone has changed the password, you will need to use that.
Note: If you don't know what the current password is, use the password reset procedure. |
User Name : apc
Password : ******
When you login, you will see the default menu.
American Power Conversion Network Management Card AOS v6.2.1
(c) Copyright 2015 All Rights Reserved Smart-UPS & Matrix-UPS APP v6.2.1
-------------------------------------------------------------------------------
Name : apcF18EB3 Date : 11/14/2016
Contact : Unknown Time : 08:34:31
Location : Unknown User : Super User
Up Time : 19 Days 20 Hours 38 Minutes Stat : P+ N4+ N6+ A+
Type ? for command listing
Use tcpip command for IP address(-i), subnet(-s), and gateway(-g)
apc>
Any questions, feedback, advice, complaints or meanderings are welcome. | |||
Alteeve's Niche! | Enterprise Support: Alteeve Support |
Community Support | |
© Alteeve's Niche! Inc. 1997-2024 | Anvil! "Intelligent Availability®" Platform | ||
legal stuff: All info is provided "As-Is". Do not use anything here unless you are willing and able to take responsibility for your own actions. |