Ethernet Switch Configuration: Revision history

Jump to navigation Jump to search

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

29 March 2024

  • curprev 20:1220:12, 29 March 2024‎ Digimer talk contribs‎ 824 bytes +824‎ Created page with "{{howto_header}} The Anvil! is agnostic on ethernet switches. The only requirements is that there are two switches, that VLAN traffic can flow between them, and that one switch doesn't get interrupted when the peer switch connects, disconnects, or gets replaced. Ideally, each switch should have redundant power. If this is not possible, split the first switch to run off the first UPS or PDU, and the second switch to run off the other UPS and PDU. Ideally, setup..."
Retrieved from ‘https://alteeve.com/w/Ethernet_Switch_Configuration’