Fujitsu Notes
This covers specific setup notes for Fujitsu Primenergy servers on EL6.
PrimeEnergy RX300 G7
RAID
Install the MegaCLI tools;
Check for an updates MegaCLI from here (under "Management Software and Tools"). If there is an updated version, follow the
mkdir ~/temp
cd ~/temp
# Download the updated 8.04.07_MegaCLI.zip here
unzip 8.04.07_MegaCLI.zip
unzip CLI_Lin_8.04.07.zip
unzip MegaCliLin.zip
rpm -Uvh MegaCli-8.04.07-1.noarch.rpm Lib_Utils-1.00-09.noarch.rpm
# This makes MegaCli64 app available without the full path
ln -s /opt/MegaRAID/MegaCli/MegaCli64 /sbin/
If you want to install from the AN!Cache, you can do this;
rpm -Uvh https://alteeve.com/files/Lib_Utils-1.00-09.noarch.rpm https://alteeve.com/files/MegaCli-8.04.07-1.noarch.rpm
# This makes MegaCli64 app available without the full path
ln -s /opt/MegaRAID/MegaCli/MegaCli64 /sbin/
Once installed, verify that you can see your hardware:
# Number of adapters in the server
MegaCli64 adpcount
# Make sure the controller will yell if the battery fails
MegaCli64 AdpGetProp BatWarnDsbl aAll
# Is the alarm going off (or has it been silenced)
MegaCli64 AdpGetProp AlarmDsply aAll
# All adapter properties
MegaCli64 AdpAllInfo aAll
# Get the battery info
MegaCli64 AdpBbuCmd aAll
# Get physical drive details
MegaCli64 PDList aAll
# Get virtual drive details
MegaCli64 LDInfo Lall aAll
Creating a Backup Set
ToDo: Explain this...
mkdir ~/base
cd ~/base
mkdir root
mkdir -p etc/sysconfig/network-scripts/
rsync -av /root/.bashrc root/
rsync -av /root/.ssh root/
rsync -av /etc/sysconfig/network-scripts/ifcfg-{eth*,bond*,vbr*} etc/sysconfig/network-scripts/
rsync -av /etc/sysconfig/network etc/sysconfig/
rsync -av /etc/hosts etc/
rsync -av /etc/ssh etc/
# If you have the cluster built and want to backup it's configs.
mkdir etc/cluster
mkdir etc/lvm
rsync -av /etc/cluster/cluster.conf etc/cluster/
rsync -av /etc/lvm/lvm.conf etc/lvm/
# NOTE: DRBD won't work until you've manually created the partitions.
rsync -av /etc/drbd.d etc/
# If you had to manually set the UUID in libvirtd;
mkdir etc/libvirt
rsync -av /etc/libvirt/libvirt.conf etc/libvirt/
# If you're running RHEL and want to backup your registration info;
rsync -av /etc/sysconfig/rhn etc/sysconfig/
# Pack it up
# NOTE: Change the name to suit your node.
tar -cvzf base_an-c01n01.tar.gz etc root
| Any questions, feedback, advice, complaints or meanderings are welcome. | |||
| Alteeve's Niche! | Enterprise Support: Alteeve Support |
Community Support | |
| © Alteeve's Niche! Inc. 1997-2024 | Anvil! "Intelligent Availability®" Platform | ||
| legal stuff: All info is provided "As-Is". Do not use anything here unless you are willing and able to take responsibility for your own actions. | |||