Fujitsu Notes
This covers specific setup notes for Fujitsu Primenergy servers on EL6.
PrimeEnergy RX300 G7
RAID
Install the MegaCLI tools;
Check for an updates MegaCLI from here (under "Management Software and Tools"). If there is an updated version, follow the
mkdir ~/temp
cd ~/temp
# Download the updated 8.04.07_MegaCLI.zip here
unzip 8.04.07_MegaCLI.zip
unzip CLI_Lin_8.04.07.zip
unzip MegaCliLin.zip
rpm -Uvh MegaCli-8.04.07-1.noarch.rpm Lib_Utils-1.00-09.noarch.rpm
# This makes MegaCli64 app available without the full path
ln -s /opt/MegaRAID/MegaCli/MegaCli64 /sbin/
If you want to install from the AN!Cache, you can do this;
rpm -Uvh https://alteeve.com/files/Lib_Utils-1.00-09.noarch.rpm https://alteeve.com/files/MegaCli-8.04.07-1.noarch.rpm
# This makes MegaCli64 app available without the full path
ln -s /opt/MegaRAID/MegaCli/MegaCli64 /sbin/
Once installed, verify that you can see your hardware:
# Number of adapters in the server
MegaCli64 adpcount
# Make sure the controller will yell if the battery fails
MegaCli64 AdpGetProp BatWarnDsbl aAll
# Is the alarm going off (or has it been silenced)
MegaCli64 AdpGetProp AlarmDsply aAll
# All adapter properties
MegaCli64 AdpAllInfo aAll
# Get the battery info
MegaCli64 AdpBbuCmd aAll
# Get physical drive details
MegaCli64 PDList aAll
# Get virtual drive details
MegaCli64 LDInfo Lall aAll
MegaCli64 AdpAllInfo aAll
Adapter #0
==============================================================================
Versions
================
Product Name : LSI MegaRAID SAS 9265-8i
Serial No : SV21503813
FW Package Build: 21.0.1-0100
Mfg. Data
================
Mfg. Date : 04/20/12
Rework Date : 00/00/00
Revision No : 01C
Battery FRU : N/A
Image Versions in Flash:
================
BIOS Version : 5.14.00_4.11.05.00_0x04360000
WebBIOS Version : 6.1-10-e_10-Rel
Preboot CLI Version: 05.00-02:#%00008
FW Version : 3.130.05-1169
NVDATA Version : 2.1012.03-0022
Boot Block Version : 2.03.00.00-0003
BOOT Version : 06.253.57.219
Pending Images in Flash
================
None
PCI Info
================
Controller Id : 0000
Vendor Id : 1000
Device Id : 005b
SubVendorId : 1000
SubDeviceId : 9265
Host Interface : PCIE
ChipRevision : NA
Number of Frontend Port: 0
Device Interface : PCIE
Number of Backend Port: 8
Port : Address
0 5000c5004ce47ed1
1 4433221105000000
2 4433221104000000
3 5000c5004c92339d
4 5000c5004cd3349d
5 5000c5004c922fd9
6 0000000000000000
7 0000000000000000
HW Configuration
================
SAS Address : 500605b00493bb80
BBU : Present
Alarm : Present
NVRAM : Present
Serial Debugger : Present
Memory : Present
Flash : Present
Memory Size : 1024MB
TPM : Absent
On board Expander: Absent
Upgrade Key : Present
Temperature sensor for ROC : Absent
Temperature sensor for controller : Absent
Settings
================
Current Time : 3:46:38 8/6, 2012
Predictive Fail Poll Interval : 300sec
Interrupt Throttle Active Count : 16
Interrupt Throttle Completion : 50us
Rebuild Rate : 30%
PR Rate : 30%
BGI Rate : 30%
Check Consistency Rate : 30%
Reconstruction Rate : 30%
Cache Flush Interval : 4s
Max Drives to Spinup at One Time : 4
Delay Among Spinup Groups : 2s
Physical Drive Coercion Mode : Disabled
Cluster Mode : Disabled
Alarm : Enabled
Auto Rebuild : Enabled
Battery Warning : Enabled
Ecc Bucket Size : 15
Ecc Bucket Leak Rate : 1440 Minutes
Restore HotSpare on Insertion : Disabled
Expose Enclosure Devices : Enabled
Maintain PD Fail History : Enabled
Host Request Reordering : Enabled
Auto Detect BackPlane Enabled : SGPIO/i2c SEP
Load Balance Mode : Auto
Use FDE Only : No
Security Key Assigned : No
Security Key Failed : No
Security Key Not Backedup : No
Default LD PowerSave Policy : Automatic
Maximum number of direct attached drives to spin up in 1 min : 120
Auto Enhanced Import : No
Any Offline VD Cache Preserved : No
Allow Boot with Preserved Cache : No
Disable Online Controller Reset : No
PFK in NVRAM : No
Use disk activity for locate : No
POST delay : 90 seconds
Capabilities
================
RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span
Supported Drives : SAS, SATA
Allowed Mixing:
Mix in Enclosure Allowed
Mix of SAS/SATA of HDD type in VD Allowed
Status
================
ECC Bucket Count : 0
Limitations
================
Max Arms Per VD : 32
Max Spans Per VD : 8
Max Arrays : 128
Max Number of VDs : 64
Max Parallel Commands : 1008
Max SGE Count : 60
Max Data Transfer Size : 8192 sectors
Max Strips PerIO : 42
Max LD per array : 16
Min Strip Size : 8 KB
Max Strip Size : 1.0 MB
Max Configurable CacheCade Size: 512 GB
Current Size of CacheCade : 0 GB
Current Size of FW Cache : 887 MB
Device Present
================
Virtual Drives : 1
Degraded : 0
Offline : 0
Physical Devices : 7
Disks : 6
Critical Disks : 0
Failed Disks : 0
Supported Adapter Operations
================
Rebuild Rate : Yes
CC Rate : Yes
BGI Rate : Yes
Reconstruct Rate : Yes
Patrol Read Rate : Yes
Alarm Control : Yes
Cluster Support : Yes
BBU : No
Spanning : Yes
Dedicated Hot Spare : Yes
Revertible Hot Spares : Yes
Foreign Config Import : Yes
Self Diagnostic : Yes
Allow Mixed Redundancy on Array : No
Global Hot Spares : Yes
Deny SCSI Passthrough : No
Deny SMP Passthrough : No
Deny STP Passthrough : No
Support Security : No
Snapshot Enabled : No
Support the OCE without adding drives : Yes
Support PFK : Yes
Support PI : No
Support Boot Time PFK Change : No
Disable Online PFK Change : No
PFK TrailTime Remaining : 0 days 0 hours
Support Shield State : No
Block SSD Write Disk Cache Change: No
Supported VD Operations
================
Read Policy : Yes
Write Policy : Yes
IO Policy : Yes
Access Policy : Yes
Disk Cache Policy : Yes
Reconstruction : Yes
Deny Locate : No
Deny CC : No
Allow Ctrl Encryption: No
Enable LDBBM : No
Support Breakmirror : No
Power Savings : Yes
Supported PD Operations
================
Force Online : Yes
Force Offline : Yes
Force Rebuild : Yes
Deny Force Failed : No
Deny Force Good/Bad : No
Deny Missing Replace : No
Deny Clear : No
Deny Locate : No
Support Temperature : Yes
Disable Copyback : No
Enable JBOD : No
Enable Copyback on SMART : No
Enable Copyback to SSD on SMART Error : Yes
Enable SSD Patrol Read : No
PR Correct Unconfigured Areas : Yes
Enable Spin Down of UnConfigured Drives : Yes
Disable Spin Down of hot spares : No
Spin Down time : 30
T10 Power State : Yes
Error Counters
================
Memory Correctable Errors : 0
Memory Uncorrectable Errors : 0
Cluster Information
================
Cluster Permitted : Yes
Cluster Active : No
Default Settings
================
Phy Polarity : 0
Phy PolaritySplit : 0
Background Rate : 30
Strip Size : 64kB
Flush Time : 4 seconds
Write Policy : WB
Read Policy : Adaptive
Cache When BBU Bad : Disabled
Cached IO : No
SMART Mode : Mode 6
Alarm Disable : Yes
Coercion Mode : None
ZCR Config : Unknown
Dirty LED Shows Drive Activity : No
BIOS Continue on Error : No
Spin Down Mode : None
Allowed Device Type : SAS/SATA Mix
Allow Mix in Enclosure : Yes
Allow HDD SAS/SATA Mix in VD : Yes
Allow SSD SAS/SATA Mix in VD : No
Allow HDD/SSD Mix in VD : No
Allow SATA in Cluster : No
Max Chained Enclosures : 16
Disable Ctrl-R : Yes
Enable Web BIOS : Yes
Direct PD Mapping : No
BIOS Enumerate VDs : Yes
Restore Hot Spare on Insertion : No
Expose Enclosure Devices : Yes
Maintain PD Fail History : Yes
Disable Puncturing : No
Zero Based Enclosure Enumeration : No
PreBoot CLI Enabled : Yes
LED Show Drive Activity : Yes
Cluster Disable : No
SAS Disable : No
Auto Detect BackPlane Enable : SGPIO/i2c SEP
Use FDE Only : No
Enable Led Header : No
Delay during POST : 0
EnableCrashDump : No
Disable Online Controller Reset : No
EnableLDBBM : No
Un-Certified Hard Disk Drives : Allow
Treat Single span R1E as R10 : No
Max LD per array : 16
Power Saving option : All power saving options are enabled
Default spin down time in minutes: 30
Enable JBOD : No
TTY Log In Flash : No
Auto Enhanced Import : No
BreakMirror RAID Support : No
Disable Join Mirror : No
Enable Shield State : No
Time taken to detect CME : 60s
Exit Code: 0x00
and:
MegaCli64 PDList aAll
Adapter #0
Enclosure Device ID: 252
Slot Number: 0
Drive's postion: DiskGroup: 0, Span: 0, Arm: 3
Enclosure position: N/A
Device Id: 11
WWN: 5000C5004C922FD8
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 279.396 GB [0x22ecb25c Sectors]
Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]
Coerced Size: 278.875 GB [0x22dc0000 Sectors]
Firmware state: Online, Spun Up
Device Firmware Level: 0004
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000c5004c922fd9
SAS Address(1): 0x0
Connected Port Number: 5(path0)
Inquiry Data: SEAGATE ST9300653SS 00046XN0TLD7
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive Temperature :37C (98.60 F)
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No
Enclosure Device ID: 252
Slot Number: 1
Drive's postion: DiskGroup: 0, Span: 0, Arm: 2
Enclosure position: N/A
Device Id: 10
WWN: 5000C5004CD3349C
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 279.396 GB [0x22ecb25c Sectors]
Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]
Coerced Size: 278.875 GB [0x22dc0000 Sectors]
Firmware state: Online, Spun Up
Device Firmware Level: 0004
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000c5004cd3349d
SAS Address(1): 0x0
Connected Port Number: 4(path0)
Inquiry Data: SEAGATE ST9300653SS 00046XN0WNY9
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive Temperature :38C (100.40 F)
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No
Enclosure Device ID: 252
Slot Number: 2
Drive's postion: DiskGroup: 0, Span: 0, Arm: 1
Enclosure position: N/A
Device Id: 9
WWN: 5000C5004C92339C
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 279.396 GB [0x22ecb25c Sectors]
Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]
Coerced Size: 278.875 GB [0x22dc0000 Sectors]
Firmware state: Online, Spun Up
Device Firmware Level: 0004
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000c5004c92339d
SAS Address(1): 0x0
Connected Port Number: 3(path0)
Inquiry Data: SEAGATE ST9300653SS 00046XN0TLGR
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive Temperature :38C (100.40 F)
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No
Enclosure Device ID: 252
Slot Number: 3
Drive's postion: DiskGroup: 0, Span: 0, Arm: 0
Enclosure position: N/A
Device Id: 8
WWN: 5000C5004CE47ED0
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 279.396 GB [0x22ecb25c Sectors]
Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]
Coerced Size: 278.875 GB [0x22dc0000 Sectors]
Firmware state: Online, Spun Up
Device Firmware Level: 0004
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000c5004ce47ed1
SAS Address(1): 0x0
Connected Port Number: 0(path0)
Inquiry Data: SEAGATE ST9300653SS 00046XN0RPCD
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive Temperature :36C (96.80 F)
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No
Enclosure Device ID: 252
Slot Number: 6
Enclosure position: N/A
Device Id: 13
WWN: 5000000000000000
Sequence Number: 1
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA
Raw Size: 119.242 GB [0xee7c2b0 Sectors]
Non Coerced Size: 118.742 GB [0xed7c2b0 Sectors]
Coerced Size: 118.718 GB [0xed70000 Sectors]
Firmware state: Unconfigured(good), Spun Up
Device Firmware Level: 1.0
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x4433221105000000
Connected Port Number: 1(path0)
Inquiry Data: 120681000100145305F5Corsair Performance Pro 1.0
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Solid State Device
Drive Temperature : N/A
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Drive has flagged a S.M.A.R.T alert : No
Enclosure Device ID: 252
Slot Number: 7
Enclosure position: N/A
Device Id: 12
WWN: 5000000000000000
Sequence Number: 1
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA
Raw Size: 119.242 GB [0xee7c2b0 Sectors]
Non Coerced Size: 118.742 GB [0xed7c2b0 Sectors]
Coerced Size: 118.718 GB [0xed70000 Sectors]
Firmware state: Unconfigured(good), Spun Up
Device Firmware Level: 1.0
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x4433221104000000
Connected Port Number: 2(path0)
Inquiry Data: 120681000100145307B9Corsair Performance Pro 1.0
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Solid State Device
Drive Temperature : N/A
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Drive has flagged a S.M.A.R.T alert : No
Exit Code: 0x00
and:
MegaCli64 LDInfo Lall aAll
Adapter 0 -- Virtual Drive Information:
Virtual Drive: 0 (Target Id: 0)
Name :
RAID Level : Primary-5, Secondary-0, RAID Level Qualifier-3
Size : 836.625 GB
Parity Size : 278.875 GB
State : Optimal
Strip Size : 64 KB
Number Of Drives : 4
Span Depth : 1
Default Cache Policy: WriteBack, ReadAhead, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteBack, ReadAhead, Direct, No Write Cache if Bad BBU
Default Access Policy: Read/Write
Current Access Policy: Read/Write
Disk Cache Policy : Disk's Default
Encryption Type : None
Default Power Savings Policy: Controller Defined
Current Power Savings Policy: Automatic
Can spin up in 1 minute: Yes
LD has drives that support T10 power conditions: Yes
LD's IO profile supports MAX power savings with cached writes: Yes
Is VD Cached: No
Exit Code: 0x00
and:
MegaCli64 AdpBbuCmd aAll
BBU status for Adapter: 0
BatteryType: iBBU-09
Voltage: 4084 mV
Current: 0 mA
Temperature: 30 C
Battery State : Operational
BBU Firmware Status:
Charging Status : None
Voltage : OK
Temperature : OK
Learn Cycle Requested : No
Learn Cycle Active : No
Learn Cycle Status : OK
Learn Cycle Timeout : No
I2c Errors Detected : No
Battery Pack Missing : No
Battery Replacement required : No
Remaining Capacity Low : No
Periodic Learn Required : No
Transparent Learn : No
No space to cache offload : No
Pack is about to fail & should be replaced : No
Cache Offload premium feature required : No
Module microcode update required : No
BBU GasGauge Status: 0x0280
Relative State of Charge: 100 %
Charger System State: 1
Charger System Ctrl: 0
Charging current: 0 mA
Absolute state of charge: 0 %
Max Error: 0 %
Battery backup charge time : 48 hours +
BBU Capacity Info for Adapter: 0
Relative State of Charge: 100 %
Absolute State of charge: 86 %
Remaining Capacity: 1294 mAh
Full Charge Capacity: 1294 mAh
Run time to empty: Battery is not being discharged.
Average time to empty: 2 Hour, 35 Min.
Estimated Time to full recharge: Battery is not being charged.
Cycle Count: 3
BBU Design Info for Adapter: 0
Date of Manufacture: 12/27, 2011
Design Capacity: 1500 mAh
Design Voltage: 4100 mV
Specification Info: 0
Serial Number: 2641
Pack Stat Configuration: 0x0000
Manufacture Name: LS36691
Device Name: iBBU-09
Device Chemistry: LION
Battery FRU: N/A
Transparent Learn = 0
App Data = 0
BBU Properties for Adapter: 0
Auto Learn Period: 30 Days
Next Learn time: Sep 4 2012 01:24:20
Learn Delay Interval:0 Hours
Auto-Learn Mode: Enabled
BBU Mode = 5
Exit Code: 0x00
Creating a Backup Set
ToDo: Explain this...
mkdir ~/base
cd ~/base
mkdir root
mkdir -p etc/sysconfig/network-scripts/
rsync -av /root/.bashrc root/
rsync -av /root/.ssh root/
rsync -av /etc/sysconfig/network-scripts/ifcfg-{eth*,bond*,vbr*} etc/sysconfig/network-scripts/
rsync -av /etc/sysconfig/network etc/sysconfig/
rsync -av /etc/hosts etc/
rsync -av /etc/ssh etc/
# If you have the cluster built and want to backup it's configs.
mkdir etc/cluster
mkdir etc/lvm
rsync -av /etc/cluster/cluster.conf etc/cluster/
rsync -av /etc/lvm/lvm.conf etc/lvm/
# NOTE: DRBD won't work until you've manually created the partitions.
rsync -av /etc/drbd.d etc/
# If you had to manually set the UUID in libvirtd;
mkdir etc/libvirt
rsync -av /etc/libvirt/libvirt.conf etc/libvirt/
# If you're running RHEL and want to backup your registration info;
rsync -av /etc/sysconfig/rhn etc/sysconfig/
# Pack it up
# NOTE: Change the name to suit your node.
tar -cvzf base_an-c01n01.tar.gz etc root
| Any questions, feedback, advice, complaints or meanderings are welcome. | |||
| Alteeve's Niche! | Enterprise Support: Alteeve Support |
Community Support | |
| © Alteeve's Niche! Inc. 1997-2024 | Anvil! "Intelligent Availability®" Platform | ||
| legal stuff: All info is provided "As-Is". Do not use anything here unless you are willing and able to take responsibility for your own actions. | |||