Fujitsu Notes
This covers specific setup notes for Fujitsu Primenergy servers on EL6.
PrimeEnergy RX300 G7
RAID
Install the MegaCLI tools;
Check for an updates MegaCLI from here (under "Management Software and Tools"). If there is an updated version, follow the
mkdir ~/temp
cd ~/temp
# Download the updated 8.04.07_MegaCLI.zip here
unzip 8.04.07_MegaCLI.zip
unzip CLI_Lin_8.04.07.zip
unzip MegaCliLin.zip
rpm -Uvh MegaCli-8.04.07-1.noarch.rpm Lib_Utils-1.00-09.noarch.rpm
# This makes MegaCli64 app available without the full path
ln -s /opt/MegaRAID/MegaCli/MegaCli64 /sbin/
If you want to install from the AN!Cache, you can do this;
rpm -Uvh https://alteeve.com/files/Lib_Utils-1.00-09.noarch.rpm https://alteeve.com/files/MegaCli-8.04.07-1.noarch.rpm
# This makes MegaCli64 app available without the full path
ln -s /opt/MegaRAID/MegaCli/MegaCli64 /sbin/
Once installed, verify that you can see your hardware:
APC UPSes
Note: These are specific links. They may break as updated packages are released. |
Easiest way to setup apcupsd is via EPEL. This will install it in such a way that EPEL packages will never mess with core RHEL packages. However, if the client has official RHEL support, consult with Red Hat to ensure this doesn't violate support. If it does, discuss alternative options.
yum -y install yum-protectbase
wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt # import keys
rpm -K rpmforge-release-0.5.2-2.el6.rf.*.rpm # verify package integrity
rpm -i rpmforge-release-0.5.2-2.el6.rf.*.rpm # install
# install EPEL
rpm -Uvh http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-5.noarch.rpm
</bash>
Now edit the repo to protect the base RPMs.
<source lang="bash">
cp /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.orig
vim /etc/yum.repos.d/CentOS-Base.repo
Now install apcupsd
Creating a Backup Set
ToDo: Explain this...
mkdir ~/base
cd ~/base
mkdir root
mkdir -p etc/sysconfig/network-scripts/
rsync -av /root/.bashrc root/
rsync -av /root/.ssh root/
rsync -av /etc/sysconfig/network-scripts/ifcfg-{eth*,bond*,vbr*} etc/sysconfig/network-scripts/
rsync -av /etc/sysconfig/network etc/sysconfig/
rsync -av /etc/hosts etc/
rsync -av /etc/ssh etc/
# If you have the cluster built and want to backup it's configs.
mkdir etc/cluster
mkdir etc/lvm
rsync -av /etc/cluster/cluster.conf etc/cluster/
rsync -av /etc/lvm/lvm.conf etc/lvm/
# NOTE: DRBD won't work until you've manually created the partitions.
rsync -av /etc/drbd.d etc/
# If you had to manually set the UUID in libvirtd;
mkdir etc/libvirt
rsync -av /etc/libvirt/libvirt.conf etc/libvirt/
# If you're running RHEL and want to backup your registration info;
rsync -av /etc/sysconfig/rhn etc/sysconfig/
# Pack it up
# NOTE: Change the name to suit your node.
tar -cvzf base_an-c01n01.tar.gz etc root
Any questions, feedback, advice, complaints or meanderings are welcome. | |||
Alteeve's Niche! | Enterprise Support: Alteeve Support |
Community Support | |
© Alteeve's Niche! Inc. 1997-2024 | Anvil! "Intelligent Availability®" Platform | ||
legal stuff: All info is provided "As-Is". Do not use anything here unless you are willing and able to take responsibility for your own actions. |