Node Assassin v1.1.4 Kit

From Alteeve Wiki
Revision as of 05:22, 18 April 2010 by Digimer (talk | contribs) (Created page with '{{na_v1.1.4_header}} = Overview = I am making these kits available to help out people living in areas where they can't get all the parts easily. If there is much interest, I've…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

 Node Assassin :: Node_Assassin v1.1.4 :: Node Assassin v1.1.4 Kit

Overview

I am making these kits available to help out people living in areas where they can't get all the parts easily. If there is much interest, I've spoken to Creatron's owner and he will be willing to make the kits available, too. All prices here are in Canadian dollars. Shipping charges and duty will be the actual cost to get the kit to you. For shipping purposes, the box will be listed as "Educational Electronics Kit". Whether the kit is insured or not is up to you.

Components

The kits contains three parts:

Prices

You only need to get the Arduino and/or shield if you don't have them already. I've not worked out how I will accept payment yet... I will sort that out once I see that there is interest in this kit. I will probably setup a Paypal account at first. Cheques are ok, too, but the order won't ship until the cheque clears.

Prices are:

Node Assassin Kit: $55
Arduino Duemillanove $35
Wiznet Ethernet Shield: $60

What's In the Kit

Contents of the Node Assassin v1.1.4 kit. Arduino and Network Shield included.

The Node Assassin v1.1.4 kit contains:

  • Arduino Duemillanove (optional)
  • Wiznet Ethernet Shield (optional)
  • Node Assassin Kit

The parts in the Node Assassin kit:

Qty. Description
1 Lab-Easy PADS-4 (or equiv)
1 74HC32 (High Current Quad OR gate)
1 74HC540 (High Current Hex Inverter)
1 74HC541 (High Current Hex Buffer)
3 LTV-846 (Quad Optical Isolators)
8 10mA (or lower) Green LEDs (example)
4 10mA (or lower) Red LEDs (example)
4 10mA (or lower) Yellow or Orange LEDs (example)
20 330 ohm 0.25w resistors (example)
3 0.1uF Capacitors (example)
8 5V+ Zener Diode (example)
40 2.54mm Pitch Board-to-Board Connectors, ~6mm connector length, solder type (4x4, 12x2) (example)
20 2.54mm Pitch Board-to-Board Connectors, ~15mm connector length, solder type (3x6, 1x2) (example)
1 Micro Momentary Contact Switch (example)
4 4-Position female 2.54mm pitch crimp connectors and housing (example housing, example mini-PV pin)
12 2-Position female 2.54mm pitch crimp connectors and housing (example housing, example mini-PV pin)

Note: I buy the components for each kit as they are ordered. For this reason, I can't guarantee that all parts will be the same from one order to the next, but all parts will be equivalent. For example, a given chip may be a Fairchild or Texas Instruments, etc. I usually get to Creatron once a week, usually on a Saturday. I can usually get the parts and ship out a kit in about a week from the time the order is placed.


 

Any questions, feedback, advice, complaints or meanderings are welcome.
Alteeve's Niche! Enterprise Support:
Alteeve Support
Community Support
© Alteeve's Niche! Inc. 1997-2024   Anvil! "Intelligent Availability®" Platform
legal stuff: All info is provided "As-Is". Do not use anything here unless you are willing and able to take responsibility for your own actions.