Possible Cases

From Alteeve Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

 Node Assassin :: Possible Cases

This is a dumping grounds for cases to look at for the finished board.

Digikey

HM370-ND

Wide enough, but possibly too deep.

  • Dim: 7.047" L x 6.083" W x 1.378" H
  • HM370-ND

HM862-ND

Might not be wide enough.

  • Has 9v battery slot/cover.
  • Dim: 5.512" L x 2.598" W x 1.102" H
  • HM862-ND

SRA31B-ND

Might be a bit deep, but probably a good width.

  • Dim: 5.300" L x 5.100" W x 1.710" H
  • SRA31B-ND

HM245-ND

Good dimensions, front and back panels... would rather have been the width/length be swapped, but it might still do.

  • Dim: 6.161" L x 3.677" W x 1.378" H
  • HM245-ND

SRA41G-ND

It's deep, but it has mount points half-way down, so the PCB could be short and the back could be used for a battery, wiring, etc.

  • Favourite so far, but black would be best.
  • Dim: 7.120" L x 5.000" W x 1.310" H
  • SRA41G-ND

 

Input, advice, complaints and meanderings all welcome!
Digimer digimer@alteeve.ca https://alteeve.ca/w legal stuff:  
All info is provided "As-Is". Do not use anything here unless you are willing and able to take resposibility for your own actions. © 1997-2013
Naming credits go to Christopher Olah!
In memory of Kettle, Tonia, Josh, Leah and Harvey. In special memory of Hannah, Jack and Riley.