Protoshield v.4

From Alteeve Wiki
Revision as of 22:39, 25 February 2010 by Digimer (talk | contribs)
Jump to navigation Jump to search

 Node Assassin :: Protoshield v.4

I've not been able to find the OEM's website for this product. Please let me know if you can find it.

This is an Arduino compatible prototyping shield I got from Creatron in Toronto. It is used with the v1.1.3 Node Assassin design. If you can't find this board, be sure that the one you substitute has plenty of independent pads!

Arduino Proto-Shield v.4 - Sorry, I didn't take a picture of the board by itself. Will update this pic once I get a new one in.

 

Input, advice, complaints and meanderings all welcome!
Digimer digimer@alteeve.ca https://alteeve.ca/w legal stuff:  
All info is provided "As-Is". Do not use anything here unless you are willing and able to take resposibility for your own actions. © 1997-2013
Naming credits go to Christopher Olah!
In memory of Kettle, Tonia, Josh, Leah and Harvey. In special memory of Hannah, Jack and Riley.