Selecting Hardware For Your Anvil!: Difference between revisions
(Created page with "{{howto_header}} This guide's goal is to provide a high-level overview on how to match appropriate hardware for anticipated loads on your ''Anvil!'' platform. = Foundati...") |
No edit summary |
||
| Line 2: | Line 2: | ||
This guide's goal is to provide a high-level overview on how to match appropriate hardware for anticipated loads on your ''[[Anvil!]]'' platform. | This guide's goal is to provide a high-level overview on how to match appropriate hardware for anticipated loads on your ''[[Anvil!]]'' platform. | ||
= System Requirements = | |||
To provide [[Intelligent_Availability#Complete_Stack_Redundancy|full stack redundancy]], there are minimum system requirements. These are not performance requirements, but instead, minimum features and capabilities. | |||
== UPSes == | |||
Network-connected UPSes are required in order for [[ScanCore]] to monitor incoming power states, estimated run time remaining during power outage, charge percentage during recovery and to alert on distorted input power. | |||
Currently, any UPS that supports the APC (Schneider) [http://www.apc.com/shop/ca/en/products/UPS-Network-Management-Card-2/P-AP9630 AP9630] or [http://www.apc.com/shop/ca/en/products/UPS-Network-Management-Card-2-with-Environmental-Monitoring/P-AP9631 AP9631] network cards are supported. | |||
If you plan to use a different make or model, please verify that the input voltage and frequency, battery run time and battery charge percentage can be retrieved over the network. If so, please [[Support|contact us]] and we'll be happy to work to add support. | |||
= Foundation Pack = | = Foundation Pack = | ||
Revision as of 19:06, 1 November 2016
This guide's goal is to provide a high-level overview on how to match appropriate hardware for anticipated loads on your Anvil! platform.
System Requirements
To provide full stack redundancy, there are minimum system requirements. These are not performance requirements, but instead, minimum features and capabilities.
UPSes
Network-connected UPSes are required in order for ScanCore to monitor incoming power states, estimated run time remaining during power outage, charge percentage during recovery and to alert on distorted input power.
Currently, any UPS that supports the APC (Schneider) AP9630 or AP9631 network cards are supported.
If you plan to use a different make or model, please verify that the input voltage and frequency, battery run time and battery charge percentage can be retrieved over the network. If so, please contact us and we'll be happy to work to add support.
Foundation Pack
Anvil! Nodes
Striker Dashboards
| Any questions, feedback, advice, complaints or meanderings are welcome. | |||
| Alteeve's Niche! | Enterprise Support: Alteeve Support |
Community Support | |
| © Alteeve's Niche! Inc. 1997-2024 | Anvil! "Intelligent Availability®" Platform | ||
| legal stuff: All info is provided "As-Is". Do not use anything here unless you are willing and able to take responsibility for your own actions. | |||