Lab-Easy PADS-4

From AN!Wiki
Revision as of 17:27, 26 March 2010 by Digimer (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

 Node Assassin :: Components :: Lab-Easy PADS-4

This is the prototype board used in Node Assassin v1.1.4 as an alternative, easier to build version on the Protoshield variant.

It has 36 x 19 independent, double-sided plated pads with two busses for +5Vcc and Gnd (30 pads per rail).

I got mine from Creatron in Toronto, but there is apparently an OEM page "coming soon".

Close-up photo of the Lab-Easy PADS-4 prototype PCB.


Any questions, feedback, advice, complaints or meanderings are welcome.
Us: Alteeve's Niche! Support: Mailing List IRC: #clusterlabs on Freenode   © Alteeve's Niche! Inc. 1997-2019
legal stuff: All info is provided "As-Is". Do not use anything here unless you are willing and able to take responsibility for your own actions.
Personal tools