NA v1.1.4

Node Assassin :: NA v1.1.4

This version of the Node Assassin hardware implements an 8-bit bus to get the internal port count up high to support 3 channels per node (power button, reset button and power source).

Part List

• 1x Arduino: Duemilanova
• 1x Network Shield: Assembled
• 1x Protoboard: Lab-Easy PADS-4 (or equivalent)
• 3x Optoisolators: LTV-846 (4 circuits/chip)
• 1x Inverter: 74HC540 (8-channel high-power; drives 8x 10mA LED)
• 1x Buffer: 74HC541 (8-channel high-power; drives 8x 10mA LED)
• 1x OR-Gate: 74HC32 (Quad OR Gate)
• 8x Diode: 1N4148 (Diode)

Either:

• 4x Green LEDs (max 10mA)
• 4x Red LEDs (max 10mA)

OR (harder to find)

• 4x Bicolour LEDs: 350-1839-ND (Bicolour Red/Green, 2x1 stack, common cathode, max 10mA/colour)

Diagrams

Circuit

Circuit diagram for the four-port Node Assassin v1.1.4.

PADS-4 Layout

This is an "in progress" view of the board. Final layout and wiring are still needed.

Board Layout preview using the PADS-4 prototyping board. Wiring and final layout still to come.

 

Input, advice, complaints and meanderings all welcome!
Digimer	digimer@alteeve.ca	https://alteeve.ca/w	legal stuff:
All info is provided "As-Is". Do not use anything here unless you are willing and able to take resposibility for your own actions. © 1997-2013
Naming credits go to Christopher Olah!
In memory of Kettle, Tonia, Josh, Leah and Harvey. In special memory of Hannah, Jack and Riley.