Building a Node Assassin v1.2.1
Node Assassin :: Node_Assassin v1.1.4 :: Building a Node Assassin v1.2.1 |
blah
ToDo
Agent
Add a "wait" option so that a delay can be used to prevent simultaneous fencing. Like a greylist.
Circuit Diagram
This is the BSchV3 generated circuit diagram for the v1.2.1 Node Assassin.
Take 10k resistor on node sense in, other site to +5. Node in is ground. Cable in pulls in the low.
Individual Build Images
You can download all of the build images as a single file:
- Build images (by image width):
- Node_Assassin_v1.2.1_1980.tar.bz2 - 1980px wide (original) (14 MiB).
- Node_Assassin_v1.2.1_1440.tar.bz2 - 1440px wide (38 MiB).
- Node_Assassin_v1.2.1_1280.tar.bz2 - 1280px wide (33 MiB).
- Node_Assassin_v1.2.1_1024.tar.bz2 - 1024px wide (24 MiB).
- Node_Assassin_v1.2.1_800.tar.bz2 - 800px wide (15 MiB).
Note that the smaller sizes are larger files as they were converted by a script rather than a graphics program and thus were saved somewhat less efficiently.
The following table is best viewed on a wide screen display at high resolution.
Top View
Individual Build Images - Top View | |
Bottom View
Individual Build Images - Bottom View | |
Input, advice, complaints and meanderings all welcome! | ||||
Digimer | digimer@alteeve.ca | https://alteeve.ca/w | legal stuff: | |
All info is provided "As-Is". Do not use anything here unless you are willing and able to take resposibility for your own actions. © 1997-2013 | ||||
Naming credits go to Christopher Olah! | ||||
In memory of Kettle, Tonia, Josh, Leah and Harvey. In special memory of Hannah, Jack and Riley. |