Possible Cases

Node Assassin :: Possible Cases

This is a dumping grounds for cases to look at for the finished board.

Digikey

SRA41G-ND

It's deep, but it has mount points half-way down, so the PCB could be short and the back could be used for a battery, wiring, etc.

• Favourite so far, but black would be best.
• Dim: 7.120" L x 5.000" W x 1.310" H
• SRA41G-ND
• SRA41-9VB-ND <- Same in black w/ 9v battery housing.

HM370-ND

Wide enough, but possibly too deep.

• Dim: 7.047" L x 6.083" W x 1.378" H
• HM370-ND

HM862-ND

Might not be wide enough.

• Has 9v battery slot/cover.
• Dim: 5.512" L x 2.598" W x 1.102" H
• HM862-ND

SRA31B-ND

Might be a bit deep, but probably a good width.

• Dim: 5.300" L x 5.100" W x 1.710" H
• SRA31B-ND

HM245-ND

Good dimensions, front and back panels... would rather have been the width/length be swapped, but it might still do.

• Dim: 6.161" L x 3.677" W x 1.378" H
• HM245-ND

 

Input, advice, complaints and meanderings all welcome!
Digimer	digimer@alteeve.ca	https://alteeve.ca/w	legal stuff:
All info is provided "As-Is". Do not use anything here unless you are willing and able to take resposibility for your own actions. © 1997-2013
Naming credits go to Christopher Olah!
In memory of Kettle, Tonia, Josh, Leah and Harvey. In special memory of Hannah, Jack and Riley.