Quick Tutorials

Alteeve Wiki :: How To :: Quick Tutorials

These are short tutorials designed to get you up and running with a given technology. They are not meant to be exhaustive, but they do aim to be complete enough to give you a working base to grow from. They are presented in no particular order, except maybe newer ones at the top.

M3 Guides

Anvil! Related Tutorials

• Disaster Recovery Tasks
• Managing Storage Groups

General Articles

• Managing Networks With nmcli

Archived Qwikis

• Setup apcupsd For Multiple Network-Enabled APC UPSes On EL6
  This walks through setting up the apcupsd daemon to listen to multiple, network-managed APC UPSes under EL6.
• Fujitsu Notes
  These are my notes regarding EL6 on Fujitsu PrimEnergy RX*00 S7 servers.
• HP-Specific Notes
  These are my notes regarding EL6 on HP Proliant servers.
• Documenting all Cluster.conf options valid in RHCS 2 and 3. Other clustering papers in various stages of incompleteness. In Progress
• Setting up Nagios on EL6
  incomplete Installing and configuring Nagios for advanced cluster monitoring.
• Windows 2008 R2 Xen domU Notes
  incomplete Covers performance concerns with Windows 2008 R2 Xen 3.1 / RHCS v2 domU guests.
• Configuring HP iLO 2 on EL5
  Covers installing and configuring HP's iLO version 2 under EL5. Also covers using iLO as a fence device in RHCS.
• Managing Software RAID Arrays
  Covers tearing down an existing MD, partition, creating new partitions and then new MDs on those partitions.
• Installing a Brother MFC-7840W on Fedora 14
  Should be more or less applicable to most brother MFCs.
• Compiling the Xen Hypervisor and dom0 on RHEL6
  in-progress
  Shows how to build the source Xen 4.0.1 RPMs and Michael Young's 2.6.32 dom0 kernel on Red Hat Enterprise Linux 6.
• Changing the ethX to Ethernet Device Mapping in EL6 (and modern Fedoras) and EL5
  How to change which physical network interfaces are mapped to which ethX devices.
• DHCP on an RPM-based OS ((Fedora, EL5 and EL6)
  How to setup a basic DHCP server on modern RPM-based operating systems.
• Hard drive has gone bad in DRBD
  This is a short tutorial on replacing drives in software RAID in a DRBD environment. Though it should be useful to anyone replacing a drive in a software RAID array, even if you aren't using DRBD.

 

Any questions, feedback, advice, complaints or meanderings are welcome.
Alteeve's Niche!	Alteeve Enterprise Support	Community Support
© 2025 Alteeve. Intelligent Availability® is a registered trademark of Alteeve's Niche! Inc. 1997-2025
legal stuff: All info is provided "As-Is". Do not use anything here unless you are willing and able to take responsibility for your own actions.